Electronics Forum | Tue Aug 19 09:23:18 EDT 2003 | caldon
FUJI DUDE- You can purchase a Kit from IPC for verifying machine acceptability. IPC-9850 full kit with Components and boards, and such will set you back around $26,250 (member price). Just the glass board alone will cost you $3,800 (member Price).Thi
Electronics Forum | Thu Aug 21 17:17:47 EDT 2003 | justin
Do some push / pull testing. Typically with black pad, you can flick the components right off the board. If you have this, the boards are about as reliable as a Yugo. If you get decent push / pull results, odds are you don't have black pad and you
Electronics Forum | Tue Dec 16 15:43:50 EST 2003 | patrickbruneel
Kev, I looked up records of various hollis machines with 3 preheat zones. and with progressive preheat temp. of 300 400 and 500 with a speed of 3.5ft/min the topside board temp was 120C before entering the wave. the preheat elements were infrared. W
Electronics Forum | Tue May 18 10:14:04 EDT 2004 | Rob
What affect does moisture have on sensitive components on a board as it waits for thru-hole assembly? Suppose I run a batch of boards today and the assembly dept won't be able to get to it til maybe a month from now, is it okay to just let the boards
Electronics Forum | Tue Jun 01 17:56:41 EDT 2004 | Rob
I got some information on this support mechanism but was a little unsure how it worked. Let's suppose you're getting ready to run the second side, do you place the board on this support and have the support travel into the printer? Or is the support
Electronics Forum | Tue Sep 07 17:12:34 EDT 2004 | davef
No one knows what type of board you use. So, assuming you're talking a fairly standard FR4. Q1a. actually, what is max temperature and duration can a bare PCB reflow without any quality problem? A1a. We'd guess your board could take 250*C for may
Electronics Forum | Thu Sep 30 03:33:58 EDT 2004 | pioneertechnology
Hi All We have two boards that we produce which are chip on glue. For this we use KME BD12's which use air to dispense the glue dot on to the board. This is not ideal as the glue dot size differs as we go down the tube causing us quality problems.
Electronics Forum | Wed Oct 06 00:18:01 EDT 2004 | crios
We will be outsourcing all of our PCBAs and would like to know if other companies perform DVT testing, ESD, Emissions on all of your boards or only on main boards? Our shipping deadline is near and I would like to determine the risk in not performing
Electronics Forum | Thu Apr 14 06:00:01 EDT 2005 | bryan
The shelf life of immersion silver is 6 to 12 months in good storage conditions. The finish is usually coated with a protective layer that inhibits oxidation (like with copper OSP). Care must be taken when handling the boards as the protective la
Electronics Forum | Fri May 27 14:21:27 EDT 2005 | Frank
Back in the day, we had a small solder pot used for dipping ICs that were freshly removed from defective boards. What tool did we use to clean the dross? A small piece of card board. After the card board got too toasted, we'd grab a new piece of c
SCANSMT is local stocking dealer who major in SAMSUNG,PANASONIC,YAMAHA,JUKI,FUJI mounter and MIRTEC,KOHYOUNG,PARMI,PEMTRON,CYBEROPTICS AOI&SPI,MPM,SJ,ESE Printers.HELLER,TSM Reflows are always have invertonries.welcome to visit us
Training Provider / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Floor 1,D Building,B area,Dongsheng Techwin Park,Bao'an District
Shenzhen, 30 China
Phone: 008618566662725