Electronics Forum | Thu Jun 20 16:56:26 EDT 2019 | kahrpr
It been a long time. You need special conversion cables, the board stop has to be changed and you have to swap a bunch of connectors on a card.
Electronics Forum | Thu Jun 27 13:33:21 EDT 2019 | duchoang
Wash the board or do what ever to get rid of flux /flux residue at the parts before running second side. If you can, use special reflow profile for the second side ( Less heat for bottom side).
Electronics Forum | Sun Jul 14 09:10:41 EDT 2019 | dilogic
Does anybody have it? Our printer started to act strange lately. I have user manual, but that's not enough to do the necessary troubleshooting. By the way, I really hate the way it is constructed - you need a pit to access main board. What were they
Electronics Forum | Thu Jul 18 13:14:04 EDT 2019 | emeto
From your post I would say send your board to a contract manufacturer and don't worry about it. NC process is preferred method overall, unless there is a special requirement for Water wash.
Electronics Forum | Mon Aug 05 17:50:20 EDT 2019 | travishemen
We have a Rehm oven that can vibrate hard enough to shift parts on the board. The vibration is due to flux build up on the exhaust blower. If we don't clean it regularly we start to see parts shifting in the oven.
Electronics Forum | Sat Feb 20 20:24:40 EST 2021 | sync40
Hello Ameen, It is needed a moderate impact bump to generate skew. Even blowing of the fans generally cannot generate serious skew -unless the pads apertures are not suitable for the components size/weight. You can try for yourself. Take a board wi
Electronics Forum | Mon Aug 19 07:42:59 EDT 2019 | robl
At least one of them looks like a handling issue to me - the last picture shows the crack going into the termination as a scratch on the right side - as if someone has slid another board into a magazine without leaving enough space. This one looks li
Electronics Forum | Thu Sep 12 10:49:35 EDT 2019 | kbaker
I am looking for an installation guide for a Technical Devices Nu/Clean board washer. If anyone has a spare or a copy please let me know!
Electronics Forum | Tue Sep 24 13:03:51 EDT 2019 | davef
IPC-J-STD-003C: Solderability Tests for Printed Boards [ https://shop.ipc.org/IPC-J-STD-003C-WAM1-2-English-D ]
Electronics Forum | Tue Oct 08 10:16:39 EDT 2019 | leeg
We used a similar part and adjusted the routing so that the front edge of the connector was supported and therefore keeping the connector flat and it not being able to tip forward. I don't know if this is something that you can do with your board?
SCANSMT is local stocking dealer who major in SAMSUNG,PANASONIC,YAMAHA,JUKI,FUJI mounter and MIRTEC,KOHYOUNG,PARMI,PEMTRON,CYBEROPTICS AOI&SPI,MPM,SJ,ESE Printers.HELLER,TSM Reflows are always have invertonries.welcome to visit us
Training Provider / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Floor 1,D Building,B area,Dongsheng Techwin Park,Bao'an District
Shenzhen, 30 China
Phone: 008618566662725