Electronics Forum | Sun Dec 13 08:49:15 EST 1998 | Ron Costa
Has anyone had any experience with using this alternative plating process? Some board houses are pushing toward this plating. Is there any long term data on this process? Any problems experienced with smt and thru-hole? I've heard tin whiskers to be
Electronics Forum | Wed Dec 02 05:20:57 EST 1998 | Jim Mitchell
Quad still sells a low end convection/IR bench top oven for about $15,000. (ZCR 412B) It is limited to a 12" board but may work for your application. IR ovens have gone out of favor recently. There should be some older IR ovens for under $5,000 f
Electronics Forum | Sun Nov 29 21:14:22 EST 1998 | Erhan Kaya
Hi Terry, I do the same thing Chris is suggesting. I am not sure about the company who made the thermocouples I use but most probably it's the same. I'll let you know if they're different so that you'll have an alternative source. I also agree with
Electronics Forum | Thu Nov 26 00:34:30 EST 1998 | Brian G.
Certain board designs require the unavoidable use of non-plated holes and slots. Presently, this requires a trip back to the drill house to open up the aforementioned holes, to remove the unwanted plating. In situations requiring non-plated holes and
Electronics Forum | Fri Nov 13 20:17:35 EST 1998 | Chuck Garth
| | I believe that gold fingers on my circuit boards are being | | contaminated and need to clean them with some chemical | | solution. Any recommendations. | | | Chuck: What is the type and source of your contamination? Dave F | We are using a s
Electronics Forum | Fri Oct 30 08:22:57 EST 1998 | Michael Nguyen
I finally got my problem figured out on the bridging, the only thing I'm finding is that I notice some litlte solder balls on the bottom of the board. Is that normal? Is that why I'm getting bridges? Has anyone came across this problem and pass the i
Electronics Forum | Sun Oct 25 03:11:13 EST 1998 | Paul Ramsey
Can anyone help me out? I am looking for any information on In-line automatic optical inspection systems for SMT (not Bare Board). Does anyone have any thoughts which equipment is ok? I have visited MVT & cyberoptics sites but i would like more detai
Electronics Forum | Wed Oct 21 09:16:01 EDT 1998 | ULISES PENAHERRERA
I'M LOOKING FOR A SOLVENT TO MAKE REMOVING EPOXY FROM THE BOTTOMSIDE OF BOARD ON SMT COMPONENTS. THIS IS MOST IMPORTANT AFTER THE EPOXY HAS CURED AND EVEN RAN THROUGH THE WAVE. I'M LOOKING FOR A WAY OF MAKING THE REWORK PROCESS ON THE CURED EPOXY MO
Electronics Forum | Thu Oct 15 15:34:16 EDT 1998 | Andrew
We have a need to bond Flatpack and Quadpack components to the circuit board. The adhesive should be quick curing, repairable and have a low modulus. It does not have to be thermally conductive (but it would be a plus). The components are currently
Electronics Forum | Thu Oct 15 10:26:13 EDT 1998 | Dave Celestian
I have a problem with measling on our PCB's. We saw it on our FR4 PCB's at final assembly yesterday. Is this a defect from the board vendor or something we did in our assembly process when building the PCA's (thru hole). Could the wave solder mach
SCANSMT is local stocking dealer who major in SAMSUNG,PANASONIC,YAMAHA,JUKI,FUJI mounter and MIRTEC,KOHYOUNG,PARMI,PEMTRON,CYBEROPTICS AOI&SPI,MPM,SJ,ESE Printers.HELLER,TSM Reflows are always have invertonries.welcome to visit us
Training Provider / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Floor 1,D Building,B area,Dongsheng Techwin Park,Bao'an District
Shenzhen, 30 China
Phone: 008618566662725