Electronics Forum | Mon Nov 24 12:48:54 EST 2008 | swag
Steve, We build a lot of small flex circuits and we use conductive silicone mesh in our wash baskets to keep things from flying around. We buy it from AGI Corporation - Huntsville, AL - 256-858-3300.
Electronics Forum | Wed Feb 18 11:36:37 EST 2009 | aj
Hi all, I have a proto build of 3 cards - the 3 cards are being supplied on the same panel. what is the best way to program this on Fuji Flexa - each card will have a lot of the same references e.g C1 , C2 etc... aj...
Electronics Forum | Tue Apr 14 15:57:22 EDT 2009 | mikesewell
We have both NXT and AIM. Be aware of the width limitation (250mm?)on the M3 module, if you go over it then you have to pair with an adjacent module to build the board.
Electronics Forum | Thu May 28 15:36:07 EDT 2009 | swag
We have Universal Genesis Lightning, Genesis In-Line 7, Advantis Flexjet + just bought 2 new Genesis platforms. Great machines. Good for high volumes or small, proto builds.
Electronics Forum | Fri Jun 26 05:18:28 EDT 2009 | rway
Contact Elect-Test Fixtures, 484-921-5350. They build our test fixtures and we get most of our fixture supplies from them. They have the standard 1" and 1.5" hold-down pins. They may have other lengths as well. Tell them Reese sent you.
Electronics Forum | Thu Jul 23 12:59:29 EDT 2009 | msherwood
Yes it was working. We moved it to another build and it stop. Which card are we talking about. X9, SBC40.
Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag
If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.
Electronics Forum | Thu Oct 08 21:29:31 EDT 2009 | stevezeva
I don't think NEA is around anymore. I know of a great guy named Don Burshnick at a place called SMT Technologies that used to build Universal machines and knows them like the back of his hand, call him at: 607-772-2900. Steve
Electronics Forum | Fri Oct 23 03:52:38 EDT 2009 | linseeg
What is the different between Rogers 4403 & Rogers 4350? Can we use two different material to build a PCB? If I use Ro4403 as prepreg and Ro4350 as core what is the advantages?
Electronics Forum | Wed Oct 28 09:28:02 EDT 2009 | spitkis2
I agree with you. Personally, I would either return them and look for a new supplier or scrap these boards. Unless your customer provided these boards and gave you the go ahead to populate them, they will not be too pleased about the build.
