Electronics Forum | Fri Mar 31 16:02:35 EST 2006 | daxman
I'm not sure if we are on the same page here....maybe i'm lost in the terminology. We are pulling the entire placing head. The Windmill, the shaft, the clutches...the entire thing. I'm not sure if this is what you mean by, "dropping the clutches"
Electronics Forum | Mon Apr 03 01:19:49 EDT 2006 | daxman
Hey Sr.Tech, thanks for the heads-up. I'm familar with the removal and installation of the shafts, as well as the precautions to take...It's not only the clutches I'm trying to clean; the entire thing is way past due for a PM. I'm trying to determin
Electronics Forum | Tue Feb 07 11:41:36 EST 2006 | PWH
Band Aide Quick Fix to get you running - Change x-value for all global fiducials in your program the exact same amount as the x-offset you are experiencing on your bad machine. Likely, if (0,0) is front-left, you should move all global fids 0.3mm th
Electronics Forum | Mon Feb 13 13:19:35 EST 2006 | pjc
ECD's OvenRIDER is the only instrument I know that can measure thermal transfer efficiency of a an oven. I suppose it would work for environmental chambers too. This instrument has thermocouples to measure ambient temp of oven zones and well as hi-ma
Electronics Forum | Wed Aug 23 04:04:25 EDT 2006 | bobpan
No Steve, Having the chance to work with newer equipment and 'latest and greatest' technology opens your eyes to older 'dated' machines limitations. If your growing and you may be going towards 0402's and even 0603's.......its better to upgrade and
Electronics Forum | Wed Aug 30 10:42:42 EDT 2006 | chrisgriffin
I would recommend the UP2000 HiE. This would more than handle what you have describe. If you have a lot of warped boards, the side clamp retro might be for you. I haven't had much production experience with the grid lock, but I know of several pe
Electronics Forum | Fri Sep 01 18:59:40 EDT 2006 | chrisgriffin
Fastek- From the sound of the attitude, you must be competition. And trust me, we do much more than clean them up and paint. How about you? But thanks for the sarcasm. And when you've refurbished a hundred MPM's, you tend to become an expert.
Electronics Forum | Mon Sep 04 18:57:10 EDT 2006 | darby
From the Daily Telegraph. American Stephanie Smith was unfortunately injured when fired from a cannon at a circus in Adelaide. Let us hope she makes a full recovery. Her employer especially will hope this brave woman quickly regains full fitness and
Electronics Forum | Fri Sep 22 07:02:12 EDT 2006 | basem
Thanks Rob. Our concern is placing tiny components side by side at a minimum pitch, along with fairly large BGAs and TSOP2, which are themselves, having small to fine pitch leads. yes, accuracy in placement in our application is crucial, yet, what i
Electronics Forum | Fri Sep 22 09:06:33 EDT 2006 | daxman
We've got a problem with our AP25.. I just finished repairing and calibrating this printer. We needed to replace the camera. After the cal. was done, the print accuracy was superb. However, it seems now, the consistency will not maintain itself. T
winsouce.jpg)