Electronics Forum | Fri Feb 04 01:31:44 EST 2011 | fujiphil
Possible cause is the Middle Loading Sensor. Check the ML flag. Also, this problem occurs when the z-axis base slips. Need to level the base and re-calibrate z-axis origin.
Electronics Forum | Tue May 03 21:20:58 EDT 2011 | littlebone
Exactly. And now a day, we are sourcing quite a number of alternative component. (e.g. IC, capacitor...) Template matching may took long time to calibrate the variances too. Desperate to look for cyberoptics representative to have a presentation
Electronics Forum | Tue Apr 26 07:37:59 EDT 2011 | leemeyer
Have you performed the camera to nozzle calibration ? I can send you instructions for this if you need them.
Electronics Forum | Thu May 12 16:24:39 EDT 2011 | vickt
Also... this is ONLY a pick issue? No issues with placement for those that you do successfully pick? Have the spindles been calibrated lately?
Electronics Forum | Wed Aug 03 11:38:17 EDT 2011 | kahrpr
If your parts are placing correctly you should be fine as far as calibration. As with all pick & place machines they need greased and filters changed. The maintenance should be in the manual. You can call dynatech they should be able to help you out.
Electronics Forum | Tue Sep 13 18:32:20 EDT 2011 | marcelll
I have all the kits & jigs to service GSM I'm doing it for 20 years at much better price then Universal Contact me if interrested Marcel Duclos info@controlemd.com
Electronics Forum | Thu Nov 10 16:09:15 EST 2011 | davef
Third, if component placement is off, fix the machine (i.e. calibrate, check cleanliness of lenses and sensors, damaged nozzle) and not the CAD locations.
Electronics Forum | Mon Nov 21 14:56:34 EST 2011 | davef
Fourth, if groups of components are off, but all others are on, check for either calibration (one head only) or a damaged nozzle (or similar items).
Electronics Forum | Fri Nov 04 09:29:36 EDT 2011 | remullis
You should also have a backup calibration file to reinstall. If its software related this would put everything back to spec. Mechanically I would call Mirtec as well to ask the best method so that you dont have to reteach all your boards.
Electronics Forum | Fri Nov 04 13:08:32 EDT 2011 | dwoodbury
Hi. We are having problems with what appears to be the firmware for our QP341 machine. It will not allow us to calibrate or change any settings for the pick-up-point on the tray unit. We are following the procedure in the manuals but it is not workin
