Electronics Forum | Thu Sep 08 03:45:22 EDT 2005 | geb
Yes, unfortunately it is the PEC camera which checks Fids and is used for Feeder Teach. I have found that you do need a service check before you can register with UIC. Do you have access to their database still? Thank you
Electronics Forum | Sun Sep 25 16:02:59 EDT 2005 | mark
The calibration was ok. When i switch off the back camera and use front one everything is ok. Is it true that when Topaz use back line camera after checking the components the machine rotates the components 180 degree?. Mark \
Electronics Forum | Mon Sep 26 07:56:38 EDT 2005 | pavel_murtishev
Hi! Try to make "R_AXIS_ACCURACY" calibration for all of FNC heads for back camera only. I met such problem on Topaz-X. There was clearly seen offset on 0.8mm pitch components. I simply calibrated all cameras for FNC nozzles and problem disappeared.
Electronics Forum | Mon Dec 12 14:17:32 EST 2005 | bobpan
It sounds like the camera needs calibrated and its not something that can be explained that easily. It will not pass if its not calibrated correctly. We use the fixed camera for many different types of fine pitch and dont 'usually' have many problems
Electronics Forum | Fri Dec 09 17:57:16 EST 2005 | mika
cameras > P2P (Part to Pad looking camera or upper looking camera) > front or rear >> select the corresponding camera that You have installed. After that: just save and follow the instructions on the screeen. By the way, an important thing is: You M
Electronics Forum | Fri Jun 09 17:45:05 EDT 2006 | mika
We have some problem with the Pb-free SOIC's at the UIC GSM2 on the Flexjet head camera; (seem to remember this from before, but I can't find it on this forum). The Pb-free small SOIC:s are reflecting the light differently than leaded parts and are
Electronics Forum | Mon Aug 21 14:27:47 EDT 2006 | Gary
Watch out for the tube and camera. Tubes are over $20K and cameras can go over $15K. There are no reputable service suppliers for these. If you want a good refurbished machine with warranty call Rework,Inc. 760-458-0733. Gary
Electronics Forum | Mon Aug 28 09:54:13 EDT 2006 | cuculi54986@yahoo.com
SWAG, where did you get your replacement CCD? We've got a camera lying around that we could do some work on so we'd have a spare.
Electronics Forum | Mon Aug 28 17:00:53 EDT 2006 | flipit
I used to get about 4 years out of a GSM camera. The entire assembly from UIC used to be about $10,000.00. And yes that does equal a machine calibration.
Electronics Forum | Wed Apr 25 16:53:17 EDT 2007 | stepheniii
I believe that leader of industry, Mattel, has a camera that can be obtained at a cost effective level. I believe it is called a BarBie model. And the camera movement can be based on systems from Lionel.
