Electronics Forum | Fri Apr 08 08:35:44 EDT 2005 | Grant
Hi, What are you doing for reflow. Sounds like a cheap MYDATA TP machine second hand might do the trick, but don't know if it could do 0201 though. You can get a fairly ok manual stencil printer that might do the trick. We had one that had a linear
Electronics Forum | Thu Apr 07 20:16:23 EDT 2005 | davef
Q1) Simple way to measure the PCB warpage A1) IPC-TM-650; Method 2.4.22 Bow & Twist Q2) What is the maximum warpage can the SMT machine allow the to accept and place the component without problem. A2) That depends. IPC-A-610 Acceptability of Elect
Electronics Forum | Sat Apr 09 23:14:36 EDT 2005 | MikeaJ
In response to the post concerning the UP1500, the case is a little different. The Speedline/SMTech passwords are hardcoded into the Sigpro.exe file. Here is what you need to know: Login name: Speedline (or SMTech) Passwords are listed in order of ri
Electronics Forum | Tue Apr 12 08:25:43 EDT 2005 | davef
Q1 Can anyone explain to me what is the clean and non clean solder? A1 The trend away from CFCs has lead many users to evaluate switching to no-clean soldering processes. The term "no-clean" is actually a common misnomer when used to describe a flux
Electronics Forum | Thu Apr 14 18:28:20 EDT 2005 | darby
We use the standard supports that come with the machine. Print a 1:1 transparency of the first pass side of the pcb including mechanical outline and components. Your customer may need to supply this. Flip this over and tape it into position at th
Electronics Forum | Fri Apr 15 10:47:09 EDT 2005 | patrickbruneel
Dhanish, If I understand correct your ICT doesn't detect shorts and only measures capacitive and resistive values. The webbing as Ken mentioned would have a resistance because this is caused by a lack of flux and the web is mainly tin oxide, which w
Electronics Forum | Tue May 31 15:49:19 EDT 2005 | Stefan
Sorry, I haven't checked the forum for quite some time. HS and SP require a line computer. The computer in the machine is the same computer than the line computer out of the HP 300 serie. HP discontinued manufacturing these computers in 1996. The 332
Electronics Forum | Tue May 03 08:11:02 EDT 2005 | jh0n!
I appreciate the detailed reply. However, I had tried dimensioning the stencil to everything imaginable, including the correct/measured dimensions. Interestingly enough, after loading a new stencil into our adaptor, I had no errors with the new pro
Electronics Forum | Tue May 03 15:19:12 EDT 2005 | cuculi54986@yahoo.com
Thanks for the suggestions. We have been going around the dome to pick from the base. The placement machines are Panasonic chipshooters - MV2VB and MV2C. I have several problems with the MV2C. The K-type feeder plates were moved by my predeces
Electronics Forum | Mon May 09 17:27:46 EDT 2005 | cmiller
They are expensive so you need to have a lot of jobs that take a long time to hand solder or have a ton of masking. Also look at bottom side wave soldering, if you are having a lot of defects, the selective will allow you to solder both sides in surf