Electronics Forum | Tue Nov 28 05:31:04 EST 2006 | egrice
Lou, You should look at the ERSA/Modus AOI System! The Modus AOI uses a high resolution industrial scanner rather than a camera mounted to a gantry. It's way faster (12 seconds for whole board ) and can do everything that a camera can do and more
Electronics Forum | Fri Dec 08 10:24:11 EST 2006 | pjc
The Speedline Technologies- Electrovert AquaStorm 200 is one machine that can do the trick. You'll need the Chemical Isolation option for the RMA flux and you'll need a cleaning chemistry like what Zestron and Kyzen have. Yes, hi-density boards with
Electronics Forum | Mon Jan 22 11:50:07 EST 2007 | BWET
Can anyone recommend a material which can be used an a bare board: 1. Dispensed via a syringe 2. Mimmic the electrical characteristics of a trace 3. Be processed such that they do not reflow with the solder interconnect 4. Be processed such that the
Electronics Forum | Sun Jan 28 22:54:58 EST 2007 | darby
Welcome Sami. I am unfamiliar with Universal but in general.... If all of your placement is out the same amount in the same direction then your fiducial data is probably incorrect. This can also be caused by a machine offset problems. If all or som
Electronics Forum | Fri Mar 02 02:18:04 EST 2007 | andras
Hi Jon, Did you purchased the machine & solved your problem? I have a CSM66 with the same problem, but my door is only 850mm wide. The machines size is 1383x1378x1915. The machine can be more narrow(960mm) in one of it's size by removing the covers.
Electronics Forum | Sat May 19 02:42:03 EDT 2007 | vinitverma
Hi Bart, I suggest you have a look at Assembleon's OPAL XII. They have a special offer at this moment. You can select the machine with 4 heads (standard) and later if higher speed is needed, you can upgrade it to 8 heads. the machine is capable of h
Electronics Forum | Sun Jan 06 19:43:48 EST 2008 | andrewlog
I think Panasert MSR is a good machine. You can easily program these machines using text files. Panasonic pubishes the format. The CM88 is harder to program. You will need to use the PT200 machine controller program. Different text formats can be imp
Electronics Forum | Wed Jan 16 13:31:43 EST 2008 | chef
Not a current user but have purchased several systems in the past. A major point for evaluation is: Can an older used equipment do the job and not have to buy the latest, greatest all bells and whistles machine? This depends on your applications, BG
Electronics Forum | Mon Mar 17 15:45:59 EDT 2008 | slthomas
Something to consider is the ability to pick from 2mm tape if you're going be placing 0402s. Quads can't really do it (at least they couldn't do it about 6 months ago when we inquired), but you can program two feeder locations for the same feeder and
Electronics Forum | Mon Aug 18 17:15:15 EDT 2008 | jlawson
This can be seen on leaded soldering also as well as LF (worse with LF). To reduce this you can look at your stencil and profile. Printing a cross-hatch deposit can reduce the voiding as it allow gasses to release when in reflow - thats the theory
.png)
