Electronics Forum | Fri Feb 16 05:39:56 EST 2018 | abo2016
we came across the following error this morning while working on the DEK 248 screen printer. Table in/out error message. Can we be assisted with fixing this please..
Electronics Forum | Tue Feb 20 15:23:28 EST 2018 | dleeper
Proper fiducials are going to be more accurate than drill holes. Since drilling is a separate step in the PCB fab process, the registration to the PCB isn't as accurate as the copper etching process which forms the fiducials. In a pinch, it can be u
Electronics Forum | Mon Mar 05 09:12:58 EST 2018 | proceng1
If it's a plated hole though, you can use the ring around it, which should be as accurate as a copper fiducial. just know that any plated hole with a trace coming off of it will have a "tail" and it might throw the computer off when scanning.
Electronics Forum | Thu Feb 22 13:09:18 EST 2018 | tey422
I need an estimation of how many cans of Techspray 2108-12S, 12oz aerosol spray I need to coat 50 array panels of 5.25"x7" (2up)FAB for the conformal coating. Need the answer in a hurry.
Electronics Forum | Tue Feb 27 07:53:13 EST 2018 | cyber_wolf
A stencil prints thousands of apertures in one squeegee stroke. Stencils can be bought for less than 200.00 Even in a prototyping application I cannot see where a machine like that could be cost effective.
Electronics Forum | Sun Mar 04 21:36:23 EST 2018 | reckless
If the machine works I will order more of them or a bigger model. The idea of a desktop machine is very enticing. I can fit 10 of these in my R&D room. It uses Yamaha pneumatic feeders which are supposed to be very reliable.
Electronics Forum | Wed Nov 28 03:53:05 EST 2018 | mnyut
Depends on how the heat sink is located above the component ;-). However, short circuits can only be controlled if the AOI is equipped with side cameras and the view of the connections is clear.
Electronics Forum | Mon Mar 05 11:12:13 EST 2018 | assuredtech
Without a known good Executive and a known good battery and a known good Comm cable, card swapping / exchange is probably not going to be helpful yet. I might have an Executive you can try, I'll try sending you an e-mail.
Electronics Forum | Wed Mar 07 07:55:36 EST 2018 | alpha1
Let me know what model you have. I can probably help. Don
Electronics Forum | Mon Mar 12 19:23:35 EDT 2018 | ramsus
hello you can use the specific nozzles 161 or fix the pickup on axis y: 0.20mm.