Electronics Forum | Wed Mar 21 23:02:04 EDT 2007 | Guest
I did convert YM 84V for 0402, base on my expperience , this approach is not really good.This model were not really meant for 0402 placement. Nozzle H ID is really small and prone to clogging, therefore cleaning every 2 hours is a necessity( not id
Electronics Forum | Tue May 01 16:36:12 EDT 2007 | ratsalad
I have been working with GSMs since 1999. Mostly, I've been programming them but for the past 2 1/2 years or so I've also gotten to know them mechanically. I think they are great machines. If you are looking at Flex head GSMs (4-spindle) they won'
Electronics Forum | Wed May 16 13:40:19 EDT 2007 | slthomas
"I read a study a while back by IBM that showed too strong a vacuum would cause too much moisture to enter the bags." That's what the nitrogen is for. If you pull a vacuum w/o backfilling with something dry, like nitrogen, pretty soon the vacuum ove
Electronics Forum | Sat May 19 02:42:03 EDT 2007 | vinitverma
Hi Bart, I suggest you have a look at Assembleon's OPAL XII. They have a special offer at this moment. You can select the machine with 4 heads (standard) and later if higher speed is needed, you can upgrade it to 8 heads. the machine is capable of h
Electronics Forum | Wed Sep 19 17:44:22 EDT 2007 | russ
there are IPC standards, I do not know them all off hand. What are the boards failing for? I have found that sometimes the original design is not optimum for any number of reasons. Some fab shops catch these and correct and may or may not inform yo
Electronics Forum | Thu Nov 08 10:26:12 EST 2007 | slthomas
"1/2 of the paste volume is lost from the flux and carriers being removed during the reflow." Don't forget the intersticial space between your solder spheres that you lose during reflow. Not being of an engineering background I couldn't begin to a
Electronics Forum | Mon Nov 26 15:24:12 EST 2007 | joeherz
A recent thread regarding the ACE KISS equipment has me wondering if anyone is happy with their choice in selective equipment. I don't see much mentioned about Pillarhouse, Juki, ERSA and some of the others. We're currently debating whether to inve
Electronics Forum | Sat Dec 01 12:05:52 EST 2007 | slthomas
"...but does the Quad have any sensing of what is going on in the feeder?" Not with the feeders we use. Same deal as the Topaz, i.e., the machine knows if the nozzle has a part on it, but doesn't know what is happening in the feeder. There are "smar
Electronics Forum | Thu Dec 13 10:44:37 EST 2007 | slthomas
Since no one has responded I'll give you what little I know. My last place of employment used MSH-IIs and an MPAV-2B. As far as I know there is no optimisation capability at the machine like there is with your Topaz. The programmer used Panasonic
Electronics Forum | Mon Dec 17 09:38:56 EST 2007 | dborgelt
We have an outdated Metcal rework station and are thinking about purchasing a new one. We need something that has heat profile capability. We don't really need anything automated, just something that's affordable, durable, and gets the job done. Does