Electronics Forum | Mon Aug 21 10:58:34 EDT 2006 | davef
Pulsar Solder Saver: "The Solder Saver is a unique, handheld tool that scoops dross directly from the surface of the solder wave pot. The dross oxides are instantly separated from the solder using a unique high-speed rotary process system. The newly
Electronics Forum | Tue Aug 01 16:39:24 EDT 2006 | slthomas
Our problem is with the chamber beneath the drying section, where the blower is. The drying section vents directly into the chamber beneath it where the blower intake is, which is great for equalizing pressure but really counter to presenting dry air
Electronics Forum | Fri Nov 10 09:21:20 EST 2006 | Steve
I had a PDR Lightmaster Pro at the last place I worked at, and I thought it was the best rework station I've ever used. Not only because of the fact that no nozzles were needed, but the heat delivery from the focused IR light was superb. I don't know
Electronics Forum | Fri Aug 04 08:09:41 EDT 2006 | nodlac
Hi Deni- Not having many responses is an indication that many are not familiar with this Unit. Usually, many Siemens people are on this forum. Being an applications Engineer for Siemens from 1993-1998 I did not run across many of these machines in th
Electronics Forum | Wed Aug 02 17:39:54 EDT 2006 | russ
Well i guess you would not have to dry the boards but let me ask this, Are you hand cleaning water soluble flux in a sink? Never seen a cleaner without a dryer. Anyway temp and time for drying is easy to figure out. When boards are dry you have i
Electronics Forum | Thu Aug 03 10:13:41 EDT 2006 | wrongway
Hello Rush fan we have a Ekra E5 had it about a year the only thing I dont like is the foil on top of the doard holders you can take them off but if your board is warped then it dosnt clamp the board and it will fail the vision but we hav
Electronics Forum | Thu Aug 03 13:35:50 EDT 2006 | SWAG
Sorry - don't know of any studies/papers. Having dedicated blades and holders for lead free is best. Also, our customer for lead free requires a line change-over check-off sheet that we follow, sign and keep with all the paperwork for the order. T
Electronics Forum | Fri Aug 04 06:27:15 EDT 2006 | CL
Good Morning Everyone, We have started limited production runs of RoHS assemblies. Most of them are prototypes for our customers that are converting to Lead Free. We have seen on several assemblies, solder beads under the chip components that are en
Electronics Forum | Mon Aug 14 12:08:35 EDT 2006 | cuculi54986@yahoo.com
I agree with using the homeplate design on chips. Some Pb-free solder paste manufacturers recommend 1:1 apertures. This, in my experience, is not a good idea with any of the SAC305 pastes I've tried. I've been using the same stencil design guideli
Electronics Forum | Thu Aug 17 10:30:08 EDT 2006 | Chunks
Hi McGill, The straight ramp is "straight" from the manufacturers of the material. Using old process techniques from your old process materials no longer applies. We all miss the good old days, but it�s time to move on. Being of Asian descent, I t