Electronics Forum | Sat Nov 09 19:35:25 EST 2019 | richardcargill
the issue is the calibration. What you set it for has to match what it actually reads or you get the error screen at the end of every pass. If you go into the maintenance menu ( using the key next to the system button ) you can check that the pressu
Electronics Forum | Wed Mar 04 13:45:01 EST 2020 | tomdegas
I appreciate the help. The Hydra travel is fine and goes down and back up with no trouble. I swapped the Z Mot board with the Y Mot board with no change. The long ribbon cables were changed about a month ago but I will inspect them again to be sure.
Electronics Forum | Tue Aug 25 20:06:12 EDT 2020 | ldavis
Yes, this consumption rate is normal for a high purity N2 process. We switched to a generator and had a payback of about 7 months. The bigger improvement than cost reduction though was in process consistency. When we were switching bottles we were
Electronics Forum | Tue Sep 15 17:03:18 EDT 2020 | edvardvojvoda
Hello! We have a DEK Horizon 03i paste printer. When we load a new program at change over, most of the time it lost the reference point for the camera axes. After that the fiducials coordinates changed automatically to minus values. The service said,
Electronics Forum | Mon Oct 05 14:19:56 EDT 2020 | rmitchell
We are looking for a software package for tracking projects once we receive data from our customers. I found some old threads on the subject and will keep looking thru them. What are contract manufacturers out there using to track projects (not shop
Electronics Forum | Thu Dec 31 12:21:44 EST 2020 | ecogroup
I Changed old parts to New Parts for: All 5 Magnetic Contactors, Circuit Breaker/Protector 1, I/O Switch housing + contact blocks, both 12v and 110v relays. Still CP40 contactors won't engage after I/O Switch is pressed, G9D-301 Safety Relay Power Le
Electronics Forum | Fri Feb 24 18:25:09 EST 2023 | stephendo
The single most common problem I have seen is not always having ready to run error free kits for SMT waiting at all times. It eats into SMT production a lot more than most people think when there is even a single question about a part. At one OEM we
Electronics Forum | Sat May 06 00:55:56 EDT 2023 | frankchan
Thanks, hope my client in AUS can find a technician to solve this issue. We change it to 240VAC 3phrase per request, but after delivery, they wish to convert to 415VAC, now we could make some sort of instructions to them, but such changes made by oth
Electronics Forum | Wed Dec 06 17:22:03 EST 2023 | madisreivik
Hello and help ! After changing oil hose, cleaning machine and all nozzles, CP642 narrow camera started to flicker. And in nozzle centering measuring, no image at all. We checked syncro pin, seems ok. Also checked camera picture with Sony monitor,
Electronics Forum | Tue Mar 07 13:07:12 EST 2000 | JAX
Mark, You should be able to get whoever builds your wavesolder pallets to create some you can also use in SMT. The only difference is you might have to change pallet materials to reduce the weight. That's just my opinion, I could be wrong