Electronics Forum | Thu Dec 02 07:48:58 EST 2010 | jdengler
Check with IBE (800) 353-6942. They had a LCD replacement kit they were selling. Jerry
Electronics Forum | Fri Jan 07 15:09:09 EST 2011 | brianangus
Hi. Check the 5V PSU supplying the VME rack. Make sure you have 5V and not something like 3v. try removing the ISA card from the PC and try a different ISA slot in the pc. Hope this helps. Brian.
Electronics Forum | Thu Dec 16 12:16:12 EST 2010 | jdengler
You may want to also check out a cheaper package. They advertise here. Unisoft is a simpler package which makes it cheaper. http://www.unisoft-cim.com/ Jerry
Electronics Forum | Tue Dec 28 07:45:19 EST 2010 | costache
Hello all! I will have un flux evaluation very soon ( lead free, leaded, water base, solvent base), so if somebody do this already can tell me something about this, there is un evaluation list with what I shod fallow or check list at the end? Thanks
Electronics Forum | Mon Jan 03 09:36:02 EST 2011 | markhoch
There is a fan on the upper rear of the machine that has to be running for the machine to initialize. i suggest lifting open the top and check the operation of the cooling fans.
Electronics Forum | Tue Jan 04 10:05:41 EST 2011 | ev
Checked that out but all fans are running. It seems to be a heat issue. I was able to get it going the next time I started a shift.
Electronics Forum | Mon Jan 03 05:34:16 EST 2011 | jmw
Check in you system configuration that you dont have the opiton to use a matrix tray handler turned on. This is what i have seen cause this problem.
Electronics Forum | Thu Jan 06 17:20:09 EST 2011 | dyoungquist
Check out this article about nitrogen and soldering: http://www.tequipment.net/pdf/Hakko/TN00000022.pdf
Electronics Forum | Wed Jan 05 21:22:13 EST 2011 | bajin
Where you are? http://www.esdcoats.net pls check if we are near from you.
Electronics Forum | Thu Jan 20 19:13:15 EST 2011 | jeffr
You should check that the machine actually works before you buy it. I still can purchase most parts, but the Vision Board is not available anymore.