Electronics Forum | Thu Aug 20 15:19:49 EDT 2015 | superlen
JB, Thanks for the hint on the trimmer package "rough check" box, we have used it lately for some problem parts and it is indeed handy. -- On another Samsung question I have (slight thread hijack) Is anyone clear on how the "FEEDER" rotation sett
Electronics Forum | Fri Apr 04 13:03:00 EDT 2014 | jyo_409
What is the inspection procedure How to test leakage current Is 100% checking is required at IGI inspection What is the shelf life of the capacitor How much period shelf life is recommended for these capacitors How to check the ripple current of thes
Electronics Forum | Wed Jul 09 12:00:25 EDT 2014 | bobpan
You have a rather old machine that you are running....now realizing this you need to check some things. 1. Clean the scales in the x and y direction. On some of the encoders there is an led to see if its reading correctly....Usually it turns green b
Electronics Forum | Thu Feb 12 16:42:33 EST 2015 | hegemon
I can only speak for Mirtec and Yestech AOI for SMT Solder Inspection. We do use Koh-Young AOI for Solder Paste Inspection. As usual ,you need to identify exactly what it is you are trying to achieve with your AOI, if you are just trying to fill a
Electronics Forum | Mon Jun 15 17:54:38 EDT 2015 | catsem23
Hi I have been having a problem with my Hydra tool reference plate. Machine keeps stopping and comes up with error message - failed to locate hydra tool reference marks & Error mounting component .... from feeder ..... with nozzle .... I have check
Electronics Forum | Thu Oct 22 05:36:58 EDT 2015 | myleb
Hi Nhel, It's quite strange problem here... 1. The voltage check: please supply power voltage. Inside machine (BF) there is a transformer, please make sure the voltage setup is correct. 2. In Ringload information, please see the 12V and 24V, is it
Electronics Forum | Tue Jan 05 17:32:51 EST 2016 | taiji
We have a TDK radial machine VC-7C, The "DNC CUT" button doesn't change state, the machine shows alarm "904 ALM CRD RX RECEIVE 800", We already check button and relay and working OK, Also check the cables and also OK. We have no idea where else to lo
Electronics Forum | Wed Aug 24 05:23:45 EDT 2016 | bukas
hello, DEK wont start and im getting this error message: motor com error, axis 1,2,3 fatal error, reinitialise machine. this happens about 30 sec after BIOSes are copied to shadow ram. euro sys cards are inserted properly and on segment display is s
Electronics Forum | Wed Nov 02 16:35:20 EDT 2016 | csm
Dear FUJI Specialist, I need your HELP, we have an CP8-42-E and machine was working properly and from one day to another when we Turn ON the machine make all the startup and check all the list, when all is ready, you have to Puch Ready and automaticl
Electronics Forum | Tue Sep 12 12:43:26 EDT 2017 | deanm
50) traces. The design will be tested for safety and a file will be created listing all the critical components such as transformers, relays, wiring, enclosure material, etc. On the manufacturing side, a manufacturing facility must be indicated in
winsouce.jpg)
.gif)
