Electronics Forum | Tue Nov 07 12:07:10 EST 2023 | tommy_magyar
We are mounting an microphone device (SMT package) onto a PCB - how? Surface mount line or hand soldering? Contamination can only come from the solder paste, solder wire, flux, or burning the component/PCB assembly during hand soldering. Unless the
Electronics Forum | Mon Nov 20 13:53:13 EST 2023 | carl_p
I would ensure a nozzle is fitted to spindle 1, UIC genesis, Fuzion etc can be a bit funny with this. If that checks out ok, I would be ensuring nothing is obstructing the Z travel. Next would be to ensure the Z motor is at home & again this is wor
Electronics Forum | Mon Nov 20 14:48:35 EST 2023 | proceng1
Have you reached out to MIRTEC? They can easily connect through Teamviewer and check your settings and see what you see live. It would be way more effective than someone trying to troubleshoot by email. The support tech that we usually get really
Electronics Forum | Tue Dec 19 11:40:47 EST 2023 | jeana
Hello everyone, We recently got a Quad IVc machine with PPM software on it. We are struggling with 0402, as we get plenty QuadAlign failures. We ticked Vision on failure, so that we limit the amount of rejected parts, but on 0402 Vision system gi
Electronics Forum | Tue Jan 09 14:06:11 EST 2024 | poly
I recently bought an Ebso. I haven't got experience with other manufacturers but I'd currently recommend not them. It doesn't save any time over hand soldering, takes a ton of power and nitrogen, it's really hard to program, has no process control
Electronics Forum | Thu Jan 11 19:18:24 EST 2024 | madisreivik
Hello ! FUJI IP3 left head sometimes places component with rotation error. Vision processing SHOWS that component needs rotation Mechanical side is checked, looks fine. Also, changed servo, no effect. It happens randomly, maybe 1 part from 30. It
Electronics Forum | Tue Jan 30 14:18:22 EST 2024 | spoiltforchoice
It might be worth mentioning that Speedprint (now Europlacer) printers also have a calibrate using your own board capability. They arguably also target higher mix environments given that is the market the pick and place machine targets. DEK uses a v
Electronics Forum | Fri Feb 02 13:08:41 EST 2024 | jdengler
Since you are new to the industry the more important choice is who will support the machine. If you are buying used you will most likely need to "register" the equipment (pay money) to the OEM if you need support. It is most likely that you will ne
Electronics Forum | Mon Feb 19 20:43:57 EST 2024 | erici
Thanks again for the reply. I did what you mentioned on your previous message. When i rebooted the machine i came up with a "software booting" message and didn't go past that. I checked the MC and i got the error "no SRBS, system halted". What is S
Electronics Forum | Thu Feb 29 02:24:55 EST 2024 | redspare1
Strange error, I have looked at the schematic and checked all of the e-stop switches and they're good. The machine isn't connected to anything, but air and power. Has anyone else seen anything like this? 1. When pressing the active button it beeps