Electronics Forum | Mon Nov 20 15:10:56 EST 2017 | bstogsdill
Aerospace/military application- we have recently installed an SMT line. Our prior cleaning of RMA flux was Isopropyl Alcohol only, but with the reflow oven on line, the flux is now baked on. I am looking into FLUX OFF cleaner for removal of t
Electronics Forum | Fri Dec 01 14:57:25 EST 2017 | darby
Hi Jeff, Glad to see you are still around. The two S's were my first port of call....you know how hard it is to knock new information into my head. Apparently there is no visual indication. They've suggested cleaning the unit with ISO etc but I think
Electronics Forum | Thu May 17 07:45:20 EDT 2018 | vikrantraina
We have Heller Reflow Model 1809 EXL. Today we opened it hood for internal cleaning but now not able to close them. Hood opened more from entry side. We tried to manually force open from exit side & check closing with open/close button, but hood comi
Electronics Forum | Mon Jul 23 10:56:38 EDT 2018 | dleeper
I've never seen this before and I would be suspicious. Have you tried to dust it off with a brush or Q-tip, it might just be some sort of process contamination. Have you looked at the reel to see if the parts are coming in with these spots from the
Electronics Forum | Wed Aug 01 08:58:02 EDT 2018 | 2219576
Please check the solder paste height near PCB edges, Please check board clamping during solder paste printing. Please check tooling support boards must be fixed during the printing process. try to set wiper cleaning frequency and fine tune for best
Electronics Forum | Wed Sep 26 11:42:35 EDT 2018 | tey422
Thanks for your information. But the info you provided, we already found out more or less about it. The newer cleaning systems are nothing like the one I am seeking the replacement parts for. I don't think Kolb would able to provide much help for s
Electronics Forum | Tue Oct 02 10:02:03 EDT 2018 | emeto
Now you are going too deep. Purchasing should have nothing to do with your placement cost. Reducing part numbers too. These are separate processes and should be evaluated separately. You have: 1. Machine time and cost -utilities -maintenance -consu
Electronics Forum | Wed Jan 09 01:22:39 EST 2019 | kenneth0
Hi Simond, The baking process is likely to remove any moisture after the cleaning process. We wouldn't want any moisture trapped as this might cause delamination if the package is subject to subsequent heating/reflow process. Hence there's a staging
Electronics Forum | Fri Nov 09 13:53:41 EST 2018 | proceng1
We still have an old Heller 1500W kicking around and I can't locate a parts list or manual. I know some "spring cleaning" went on and I'm wondering if someone tossed them. The main issue is the edge rail chains seem to suddenly have a lot of slack.
Electronics Forum | Thu Jan 03 15:53:28 EST 2019 | cbeneat
We did figure out the issue. The plastic cover inside the LED lighting unit had a slight film covering it, which made the picture slightly hazy. We had to disassemble the LED module to get at it, cleaned it and it was fine. I didn't think this would