Electronics Forum | Wed May 23 15:11:21 EDT 2018 | jacobidiego
Hi experts, I asked our chinese board manufacturer about their recommended procedure to clean miss-printing. The answer was that they use Absolut Alcohol while use IPA currently and we are moving to a water based cleaning agent with ultrasound. Th
Electronics Forum | Mon Jun 19 17:00:39 EDT 2006 | a_laser
The most common rates of in-process cleaning (under wipe) I have encountered are once per 5 to 10 prints. But this depends a on a lot of variables. More often is typically better, but more costly in under-wipe materials. (For some more info see http:
Electronics Forum | Wed Nov 09 07:16:44 EST 2005 | pjc
Besides IPA, here is a list of links to cleaning agent suppliers besides Zestron, Vigon is a very good cleaning agent: http://www.envirosense.com/ http://www.kyzen.com/ http://www.petroferm.com/ If you give them your material mfr. and part numbe
Electronics Forum | Mon May 09 13:55:33 EDT 2016 | dyoungquist
Omega Aqua Clean LPH. The flux we use in our selective solder process is Kester 2235. Our process cleans water soluble flux very well if cleaned within 24 hours of the boards being processed. We have sent boards off for cleanliness testing per sta
Electronics Forum | Mon May 09 18:14:54 EDT 2016 | davef
I asked Randi Gates, Electrolube Marketing to join us to help with the conversation. Taking a step back from the Electrolube question, I could envision a 10 minute soak in DI water stripping the gold from a an ENIG board, you know, depending on the
Electronics Forum | Thu May 05 02:40:30 EDT 2016 | padawanlinuxero
Hello guys! I have a question for you guys, we have been working with a cleaning agent call Safewash (SWAS) from electrolube, we use this safewash to clean the flux residue from the boards after wave soldering, since or customer doesn't like to have
Electronics Forum | Thu May 04 01:52:17 EDT 2023 | davef
Look at IPC-7526 - Stencil and Misprinted Board Cleaning Handbook, Misprinted Circuit Board CleaningCLEANING [ https://www.multi-circuit-boards.eu/fileadmin/user_upload/downloads/leiterplatten_design-hilfe/ipc-7526.pdf ] ITW/EAE says "Typically, th
Electronics Forum | Tue Oct 09 11:22:08 EDT 2001 | nifhail
Can I use one common cleaning agent to clean the stencils from a lines which are using RMA, No-clean and clean paste ( b'cos we onlyhv one stencil cleaner ). What about those misprinted board ? Can all of them use the same chemical or cleaned in the
Electronics Forum | Mon Jan 27 12:02:00 EST 2003 | Mike Konrad
Dave is correct. No-clean flux + water = white residue (unless the proper chemical is mixed with the water). Additionally, no-clean flux + IPA = white residue. Many saponifiers work well as do other cleaning agents. White residue may also be a re
Electronics Forum | Sat Oct 22 09:02:46 EDT 2011 | mojomatt
Yes it is used for PCB, I have used it in the Automotive Service Industry for many uses. Most popular as a Brake assembly cleaning agent. It is popular today due to its low FLASH POINT, unlike other solvents that contain Heptane, Xylene etc thease ha
Salescon Ltd is operating for 20 years. Supplying various materials,tools machines for the electronic industry. Supplier for manufacturer companies in Hungary and CEE,providing services for SMEs and start-up businesses.
Manufacturer / Equipment Dealer / Broker / Auctions / Distributor / Consultant / Service Provider
Gyomroi str 89
Budapest, Hungary
Phone: +36 1 260 8500