Electronics Forum | Mon May 21 17:32:23 EDT 2001 | davef
I said: "Our electronic circuit board fabricators seal the boards in moisture barrier bags [MBB]. We discontinued the use of desiccant bags in these MBB because of concerns about the desiccant releasing materials that would affect the solderability
Electronics Forum | Wed Apr 30 19:55:21 EDT 2003 | Mike Konrad
In all likelihood, you may not be leaving flux on the board rather you may be leaving saponifier on the board. Improper rinsing is a leading cause of cleaning related board failures. The problem with some inline cleaning systems (especially old o
Electronics Forum | Wed Sep 22 22:44:34 EDT 2004 | davef
We agree with Paul. If you prepare the components differently, so that they snap into place, you do not need to trim after wave. Most rotary trimmers put a HUGE amount of stress on solder connections, potentially cracking the connections. Some of
Electronics Forum | Wed Feb 22 08:31:42 EST 2006 | davef
Q1 Are there any standard regulating the subject? Very few infos found on IPC. A1 We�re unaware of standards for packing and storage for most types of boards. * IPC 4553 standard for Immersion Silver Finish, 3.8 Packing and Storage. * J-STD-033 and E
Electronics Forum | Wed Jan 22 10:35:38 EST 2014 | unisoft
_a class=roll > href="http://www.graphicode.com/GC-PowerPlace" > target="_blank"_http://www.graphicode.com/GC-Power > Place _/a_this does, I had a dabble and while it > does seem quite capable the learning curve is > quite steep and I'd wager th
Electronics Forum | Fri Apr 13 09:56:55 EDT 2018 | davef
First, I don't know dip about your Meko stylus by Asin: B00N1BRWLA on Amazon USA, but I won't let that stop me. Second, your English is fine. Third, you found an excellent forum to join, just maybe not one that focuses on photography questions as m
Electronics Forum | Fri May 24 09:19:02 EDT 2019 | davef
http://www.nordsonselect.com. Accel: Cookson created Speedline after purchasing: MPM®, Electrovert®, Accel®, and Camalot®. In 2003, KPS Special Situations Fund II purchased Speedline from Cookson. In, 2007, Illinois Tool Works ITW acquired Speedlin
Electronics Forum | Tue Jan 02 23:39:01 EST 2001 | Stevo
John, I'm no helicopter guru but maybe someone in these links can help. Good luck-Stevo Mario of MIA Micro-Flight fame has put a very nice diagram of how to hook-up seperate components in a Piccolo board fashion on his website. If you are thinking o
Electronics Forum | Wed Dec 13 19:40:38 EST 2000 | Jerry Wetzel, SME, EM/SME
Your profile must be precise, your stencil aperture sizes and shapes are very important, and the size of the pads on the boards should be very close to what the part manufacturer recommends. We had some trouble with hi-temp paste, and discovered tha
Electronics Forum | Thu Dec 07 13:50:10 EST 2000 | akruppa
Hi Hany, Unfortunately, as things presently stand, there is no method for posting an image directly to the forum. You can post an image to another location, such as Yahoo�s Geocities (www.yahoo.com), www.driveway.com, or any other similar site. If
.gif)
winsouce.jpg)
