Electronics Forum | Thu Jan 13 10:09:45 EST 2005 | rlackey
Hi Fasst1, Have Assemblion/Philips actually building machines for 20 years, or were they badged machines? (I'm not asking to be funny, I'm asking as I don't know) I've build product on Topaz's, Emeralds & Comets, and they have been good machines, b
Electronics Forum | Wed Oct 05 06:10:41 EDT 2005 | lscontrol
Thanks for the help so far. But i still have problems, do to the downloaded version of Cad2Cad ver. 3 which does not have any save as/export/import or open file-posibilities which support vios, csv or txt-files or anything like it. I downloaded the
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
Electronics Forum | Mon Jul 06 22:17:13 EDT 2009 | emanuel
Thanks Jeff, I isolated the problem to the DC servo part. The GD3 signal in the safety circuit chain is the one that generates this L004 Feedback Error - which by the way next to it I get also (Wn) where n is changing form 1 to 3 every time I push r
Electronics Forum | Sat Mar 20 15:59:13 EDT 2010 | emanuel
I have a big problem in setting an smd inductor camera recognition. None of the existing options in the software version 0.99B sems to work. The part is a 6x6mm with chamfer corners of 1mm on each side, looking more as an octagon. Not only this, the
Electronics Forum | Mon Nov 19 11:02:40 EST 2018 | robl
The old YV-112 equates to the old Philips Comet, which had 16 heads. It could only go down to 0603 imperial though. Here it is in it's early 90's glory: https://tools.adoptsmt.com/equipment/?id=14777 Do I think the YSM40R will hit 200K per hour? p
Electronics Forum | Fri Jun 12 10:18:50 EDT 1998 | smd
| | | | In our continued search for another flex machine, we reconsidered Philips | | | Emerald (low Vol/high mix Mfg). We already have a CSM so it makes a little sense. Then the salesman started talking about the Topaz. The Topaz supposedly is "pra
Electronics Forum | Tue Mar 16 17:45:29 EST 1999 | Russell Bartley
| | | I'm in the process of selecting a medium speed pick & place machine. I need to place a wide range of components from 0805 | | | chips to a 144 pin MQFP (32mm square 25mil lead spacing). | | | | | | Anyway, I'm looking at the Quad QSA-30, the
Electronics Forum | Mon Jun 08 21:01:23 EDT 1998 | Dave F
| In our continued search for another flex machine, we reconsidered Philips | Emerald (low Vol/high mix Mfg). We already have a CSM so it makes a little sense. Then the salesman started talking about the Topaz. The Topaz supposedly is "practically th
Electronics Forum | Fri Jan 16 19:02:55 EST 2004 | Frank Gearhart - Assembl�on Snr. Software Technical Specialist
The OS/2 software you are referring to is the CSM-PPS v3 which was released in 1999, it is now out of service. The current software for optimizing, balancing, and generating programs for a Topaz and other Gem machines off-line, is GemLine-PPS v8.0,
