Electronics Forum | Thu Nov 29 00:38:57 EST 2012 | iqvisionmachine
About iQVision Incorporated in July 2011, iQVision’s mission is to provide reliable, robust vision-inspection solutions to Australian manufacturing industries, by establishing, then automating, objective quality processes. iQVision is a Matthews-af
Electronics Forum | Fri Jan 25 07:56:08 EST 2013 | pgarsoe
Reuters 6:13 a.m. CST, January 25, 2013 A device seen as key to explaining why a Boeing Co. 787 Dreamliner jet made an emergency landing in Japan last week is burnt and unlikely to provide safety inspectors with data they need, said a person with kn
Electronics Forum | Wed Mar 20 16:10:27 EDT 2013 | woodsmt
Most pots have a drain system, but that is a scary thing to use. I have seen places that have plumbed it nicely with ball valves and such to control the flow into small containers, but still fraught with danger. I use small metal bread pans. I lad
Electronics Forum | Wed May 22 19:10:47 EDT 2013 | anvil1021
We do a lot of these devices and I guess I am not familiar the term "Dry Solder". The QFN device is not designed to have a drain hole, but needs to have thermal vias to control heat in most cases. We have used every possible gnd pad design and modifi
Electronics Forum | Wed May 22 14:17:13 EDT 2013 | ericrr
As the subject says, the trouble started when the computer (Windows 98) drove me nuts starting up in the morning. The Engineer comes along NEVER ASK ME ANYTHING, and thinks the network should have some network protocol (Example equivalent to TCP/IP
Electronics Forum | Fri Jun 07 10:28:23 EDT 2013 | danselness
We use a Wave Solder Plated Through Hole (PTH) assembly process to install a TO-220 Chip Package in the PCB board that we manufacture and have experienced lower yields on a number of boards with this component due to Bridges. The bridges on the TO-22
Electronics Forum | Tue Jun 18 08:47:50 EDT 2013 | wolverine
We recently had one of our older machines ( DEK 265GSX built in 1996 ) begin to have a problem of shutting itself down without warning, after checking out whatever I knew to try and find the cause, I pulled out the Y3 enclosure and removed all the ca
Electronics Forum | Mon Dec 30 21:38:56 EST 2013 | jkoughan
I've got a scary one for you guys and desperately need your help - We just purchased a second Quad 4C and had some communication problems when we first turned it on (we're still working on that issue). To chase down the problem, we decided to start
Electronics Forum | Tue Jul 01 10:07:35 EDT 2014 | sarason
My program PCBSynergy will generate a file for this machine http://members.iinet.net.au/~sarason/ The machine type is Yamaha YM6021 under the dropdown menus. The Communication control is a little on the difficult side and is not as extensive as wh
Electronics Forum | Mon Aug 18 15:04:25 EDT 2014 | rgduval
Off hand, I can't recall a "formula" for how long boards could sit in a specific RH environment. I've done a couple of quick Google searches, and can find a bunch of information on the dispersion rate of moisture in various PCB materials, but, nothi