Electronics Forum | Thu Dec 04 15:06:28 EST 2008 | kmakiya
PFC box is upstream and Agilent is downstream. If Agilent conveyor runs with no board upstream pins 3 & 4 made be shorted. This should not be the case if there is no board upstream.
Electronics Forum | Sat Dec 27 12:30:40 EST 2008 | dmeister
Hi, Does anyone know how to determine the adhesive force of solder paste - specifically the ability of the paste to hold a component in place as it moves down the conveyors on an SMT line. Thanks, DM
Electronics Forum | Tue Feb 24 12:27:32 EST 2009 | ch
Hi All! Did anyone knows access codes for asys conveyors TRM-03 and AMS-05 and how this codes can be readed? I need to change some system settings. Thanks.
Electronics Forum | Wed Mar 11 12:33:28 EDT 2009 | realchunks
Make sure your oven conveyor is running smooth as well. One bump or bad vibration will knock parts off too. Lowering the bottom zones in spike zones will help too.
Electronics Forum | Tue Mar 17 19:46:41 EDT 2009 | dman97
Hi Mika, Why not just splice into the existing 2 pin connector on the beginning or end of the CP conveyors? See attached picture...
Electronics Forum | Fri Jun 12 11:19:25 EDT 2009 | gregcr
we have a small heller 988 oven that has served us very well over the years. I see them cheap on the used market. Worth looking into in my opinion.
Electronics Forum | Wed May 27 07:53:41 EDT 2009 | padawanlinuxero
Thanks ! I will try your recommendations, about the flux and the preheaters, yes they seems to be ok I will bring down de conveyor speed because it looks like if it is to fast is set to 3.6ft thanks again!
Electronics Forum | Mon Jul 20 12:18:21 EDT 2009 | wrongway
Hello Maybe its the sensor on the dek machine not seeing that it has a board so it just keeps asking for one.
Electronics Forum | Tue Jul 21 06:23:07 EDT 2009 | Jeff
Instead of using a conversion box just make your own cable. Look in the Dek manual, volume #2, chapter 18. It shows you how it's wired. Easy to make and looks allot cleaner than those conversion boxes.
Electronics Forum | Thu Jul 23 12:59:29 EDT 2009 | msherwood
Yes it was working. We moved it to another build and it stop. Which card are we talking about. X9, SBC40.