Electronics Forum | Tue Jun 20 17:23:04 EDT 2017 | snevermind
I have a stamped steel battery contact to pick that has a pick location 11mm deep in the tape. The factory machine settings only allow 6.6mm of "over-drive" depth past the top of the carrier tape. Based on that, I will need a custom nozzle that is
Electronics Forum | Tue Jul 25 12:39:41 EDT 2017 | emeto
Hello John, the answer of your question is more organizational than technical. Most CEM use their own part number system(you will need to purchase software for that), and that is exactly what you want to do.You can have 5 different resistors 10kOhm
Electronics Forum | Tue Aug 01 11:29:02 EDT 2017 | fkn
FKN Systek makes Depanelizers that work on aluminum boards. Please call me at 508 376 2500 or send email to discuss. We usually get a customer sample just to make sure. We have been selling the K3000 and K4000 Depanelizers for over 10 years to custom
Electronics Forum | Tue Aug 01 11:23:56 EDT 2017 | OrHorti
We are using a custom made nozzle, designed for this particular LED. The dome of the LED is also custom made, the diameter of the lens at the base is 2.9mm while the substrate of the package is 3.3mm, so this gives about 0.2mm spacing between lens a
Electronics Forum | Mon Aug 07 16:22:13 EDT 2017 | stephendo
The only people that can answer what you need is UL. At least once a year an inspector from UL stops by and makes sure the High-Pot tester is up to date on calibration and that we are following the BOM provided by the customer and approved by UL. A
Electronics Forum | Tue Oct 10 02:11:41 EDT 2017 | dawson
We received a .pcb file from an American customer. It is a Aluminum board, which should be easy one. But we can not open it with many SWs. We tried to open it by txt and haven't found the design software name. Our sales tried to contact the customer,
Electronics Forum | Mon Nov 13 12:17:58 EST 2017 | slthomas
Hi All, We have a new customer with a new design asking for us to leave the center VIP (8 mil drill) on a 9 ball uBGA (.5mm pitch) unplugged. What are my options should I be unable to convince them that this is going to be problematic? Obviously it
Electronics Forum | Wed Mar 07 13:58:06 EST 2018 | griinder
We are using Gerber EZ Teach to inspect near 100% of some boards. Many component footprints seem to be assigned custom packages. These custom packages come up as "preview errors" during inspection. I have noticed when I manually move the camera to th
Electronics Forum | Fri Aug 17 06:29:41 EDT 2018 | cyber_wolf
Correct stencil, wiping frequency effectiveness,and correct paste deposition are all verified by the SPI machine. I suppose you can put all kinds of things in place, but you may want to determine what is practical and "why?" are you doing it. Trac
Electronics Forum | Mon Aug 06 16:33:52 EDT 2018 | tey422
If I understand customer's intention correctly, it would be fastest, mass production with fully utilizing the Pick-N-Place machine capacity with minimum manual labor which won't break the bank. They used to manual hand soldering the coil to the boar
.gif)
