Electronics Forum | Fri Jul 02 14:32:44 EDT 1999 | Dave F
| I am currently looking into ways to decrease SMT changeover times. I work in a high mix-low volume factory. We use Fuji CP's and IP's for SMT production. I would appreciate hearing from anybody that has some proven methods for reducing setup/change
Electronics Forum | Thu Jul 01 16:43:52 EDT 1999 | Dave F
| | | Could somebody tell me what means Leaching, ie: "Leaching of terminal end face exposing the ceramic"? | | | | | Roberto: Leaching, according to the SMTnet Library of Terms: | | | | Leaching. Dissolution of a metal coating into liquid solder.
Electronics Forum | Thu Jun 24 15:58:46 EDT 1999 | Adam Pratt
| | Dear guys, | | | | I have some problem on assembling micro-BGA with solder paste (63/37). The micro-BGA we assmeble is 0.75mm pitch and with 45 pin (solder bump is 96.5/3.5Ag). The stencil is a laser-cut stencil with 5 mil thickness. We are no
Electronics Forum | Sat Jun 05 07:23:20 EDT 1999 | Dave F
| Where I can find some informations about repairing of SMT boards? | | Thanks | | Marcos | Marcos: Ya know, repair is that "dirty little" part of the business that all try to ignore, don't want to fund properly, and creats more angst than propa
Electronics Forum | Mon Jun 07 09:28:56 EDT 1999 | John Martell
Thanks a lot,, so assuming we are using standard parts, with nothing out of the ordinary we could safely assume that a machine capable of 20 mil would be more than able to meet our needs down the road. | We are changing from through-hole to SMT, won
Electronics Forum | Sat Jun 05 07:47:47 EDT 1999 | Dave F
| | | Has anyone had a problem with the trailer tape length being too short and causing placement machine to stop for parts exhaust (SMT parts)? I realize the EIA spec. is set for this length but would like to know what issues you have had. Thanks
Electronics Forum | Wed Jun 02 17:52:01 EDT 1999 | Dave F
| How do you like you�r Multitroniks machine, | | Reliable | | User friendly | | Support | | Any info would be helpful | | Looking for info on the new ones and the old ones UFP 9000, UFP 6000 | | Thanks | | MD Cox | | Mike: To help keep bot
Electronics Forum | Thu May 20 22:42:19 EDT 1999 | Dave F
| hi everybody, | We've been doing some studies on assembly of CSPs. We assembled these packages on micrivia-in-pad patterns. These are 15/13.5/11 mil pads with 6 mil design microvia, using photo/laser/plasma tech. We are seeing voids, as big as the
Electronics Forum | Tue May 18 14:47:02 EDT 1999 | Dave F
| Looking at the full convection reflow oven market, I see two segments, high mass heater ovens (i.e. Electrovert Omniflow,...), and low mass heater ovens (i.e. Heller,...) | Did some of you guys did some testing on both types and what were your find
Electronics Forum | Tue May 04 10:30:35 EDT 1999 | Dave F
| I am about to embark on an effort to evaluate 3 different solder material suppliers and their recommended materials for our assembly process, in an effort to find the best supplier/material. We do mixed technology, with NOCLEAN chemistry so I will