Electronics Forum | Fri Apr 01 02:56:18 EDT 2011 | grahamcooper22
the cause could be moisture in your pcbs. To check it...pass some bare pcbs through your reflow oven (this is a simple way of drying them out a bit), then paste and place and reflow as normal....if solder beads disappear then the pcbs have too much m
Electronics Forum | Thu Apr 28 17:02:07 EDT 2011 | grasso1976
Has anyone had success utilizing the lifted lead/ height checker feature on a Mirtec MV-7L. We recently had two separate events where the machine did not detect a lifted lead using the ic/bridge inspector. The soldering results came back with out def
Electronics Forum | Wed Jun 15 07:47:28 EDT 2011 | edmaya33
Any input on this machine good or bad would be > help ful, thanks This is a Good machine. 5K AOI Perform machine is easy to program and had a built in inline defect viewer. Low false failure/call compare to other platform. Able to detect skew, bri
Electronics Forum | Fri Aug 19 02:05:32 EDT 2011 | ppcbs
We have been developing profiles for BGA process going on 14 years now. We have never had to drill holes or resort to any type of destructive methods for BGA assembly, rework or defect analysis. Depending on requirements, i.e BGA rework or BGA assem
Electronics Forum | Mon Aug 29 16:21:20 EDT 2011 | rjlasko
Greetings...I have a customer that has an assembly that is conformal coated with Humiseal 1A33. This assembly has some components (resistors and FET's) that heated up during operation and has discolored the conformal coating around their location.
Electronics Forum | Tue Sep 27 09:43:38 EDT 2011 | dyoungquist
I did not mean to imply building to class III would prevent failures. Since there seemed to be a little confusion about the classes I threw that out to show that class III was a higher standard. I also agree that while re-work can fix a class III d
Electronics Forum | Wed Mar 28 08:12:17 EDT 2012 | mun4o
hi, you can see the MSL on the moisture barrier bag - there have label with mSL.Two years ago , I check all components in our stockk and insert the data in the ERP.For any components I find the MSL in their data sheet.About 20-30 component I cant fi
Electronics Forum | Sat Jul 13 09:56:45 EDT 2013 | davef
Look here for guidelines http://www.sensata.com/supplier/pdf/CQI-17_Soldering_System_Assessment.pdf Special processes" refer to processes that produce outputs whose output cannot be verified before being released to the customer. These products and
Electronics Forum | Sat Apr 21 07:24:01 EDT 2012 | doremi
Just found from another discussion : “The Yestech (pattern match) is very easy to program and use but it took sooooo much up-keep to keep the false calls to a manageable amount. The CyberOptics (also Omron) is more of an algorithm based type of mach
Electronics Forum | Mon Mar 19 22:09:38 EDT 2012 | davef
J-STD-003B prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin/lead or lead-free solders. This standard is
