Electronics Forum | Sat Aug 07 11:33:55 EDT 1999 | JohnW
| | What oven temperature should be used to reflow solder (Sn63Pb37) on a PC board (0.075" to 0.100" thickness) in 5 to 10 minutes? | | Profiling - tedious but important. As said, start with the paste manufacturers recomendation which is usually pu
Electronics Forum | Thu Jun 03 14:40:22 EDT 1999 | JohnW
| | | | In a month or so, we will be getting an in-line x-ray inspection machine. It will require that we solder our most comlicated side (normally top) first. This is opposite to our process now where we solder our passive (bottom) side first. W
Electronics Forum | Thu Jun 03 14:41:06 EDT 1999 | JohnW
| | | | In a month or so, we will be getting an in-line x-ray inspection machine. It will require that we solder our most comlicated side (normally top) first. This is opposite to our process now where we solder our passive (bottom) side first. W
Electronics Forum | Thu Dec 31 01:09:18 EST 1998 | Kelvin Chow
Dear Micheal, SIR test is used to characterize fluxes by determining the degration of electrical insulation resistance of rigid printed wiring board specimens after exposure to the specified flux. (IPC TM-650 #2.6.3.3 http://www.ipc.org/html/tm2.6.h
Electronics Forum | Thu Dec 31 14:20:35 EST 1998 | Michael Allen
Kelvin, Yes, we're referencing the same spec. I performed the test under the Class 2 conditions (except that I used a 100V bias rather than 50V...but my water-washed microBGAs still passed). Regarding the omegameter test: we have this instrument,
Electronics Forum | Tue Apr 14 15:42:45 EDT 1998 | Scott Cook
| Scott, | I am not really in a position to answer this as fully as I would like because most military work with which I am familiar is subject to some degree of secrecy most especially on the internet. At least we have signed up to such restrictions
Electronics Forum | Sun Aug 08 20:59:55 EDT 1999 | Dreamsniper
| | | What oven temperature should be used to reflow solder (Sn63Pb37) on a PC board (0.075" to 0.100" thickness) in 5 to 10 minutes? | | | | Profiling - tedious but important. As said, start with the paste manufacturers recomendation which is usua