Electronics Forum | Wed Apr 11 11:40:44 EDT 2001 | gcs
High temp solder is the best, but your profiler manufacturer will have some type of adhesive. I know KIC does.
Electronics Forum | Fri Apr 13 18:11:07 EDT 2001 | Pat Copeland
Does anyone out there use this chip. I have been searching the world for them. If you can spare any at all, please e-mail me. If not, where are the best sites to search for excess smt components. Thanks Pat Copeland
Electronics Forum | Mon Apr 16 17:36:25 EDT 2001 | steveb
Does anyone know of a reason, other than visual, contact, or testability, for cleaning a no-clean residue off a board? Are there any SIR or long term reliability advantages to cleaning a no-clean residue?
Electronics Forum | Tue Apr 17 09:34:08 EDT 2001 | Adam
Does anyone know what the requirements are for the maintenance and frequency of cleaning wave solder carriers? as I am in process of writing a procedure amd don't really know what to include in it. All the carriers use no clean chemistry. Thanks in
Electronics Forum | Thu Apr 19 08:50:16 EDT 2001 | robbied
I am having problems sourcing an unshrouded, through-hole header. I think the problem is that my pitch (0.15") is non-standard. I have had no reply from my queery to Molex, so does anyone know of another vendor who may be able to help? .......Thanks.
Electronics Forum | Fri Apr 20 13:55:09 EDT 2001 | kawiederhold
Hey Dougie, If you go to IPC.ORG and click on the on-line resources and databases, then on the "free downloads" link, the second or third document "for free" is the IPC-TM-650 in its entirety. It does discuss the test you are looking for! Have fun
Electronics Forum | Tue Apr 24 11:28:34 EDT 2001 | Barry
Anyone have any specific knowledge of SMTECH 100 i S machines and the pro's and con's. Does the machine capability rank as good bad or indifferent within the industry?
Electronics Forum | Mon May 14 16:39:38 EDT 2001 | T.F.
Siemens makes feeder hold down brackets for the F5 that does prevent the operator from leaving the feeder in a position that can cause a crash. The brackets attach to the feeder table so you need one bracket per table. The part part number for the b
Electronics Forum | Mon Dec 18 17:56:26 EST 2000 | Dave F
Does the thermal conductivity of a copper trace on a printed circuit board change as the copper oxidizes? Is the oxide on copper a thermal insulator? If so, should it be considered in an analysis of thermal resitivity between a ground plane and a h
Electronics Forum | Wed Sep 20 10:38:51 EDT 2000 | Dave F
When an operator using your machine damages a board during rework, how does that damage and the repair required compare with a hot system?
