Electronics Forum | Wed Oct 01 16:53:05 EDT 2003 | johnpatricelli
We use Mydata PNP equipment, and are quite happy with it's speed and accuracy, especially with the latest version of the Mydata Tpsys software which includes a prototype version of their emergent auto-teach function for package sizes that can handle
Electronics Forum | Thu Jan 08 16:43:43 EST 2004 | Dean
Unless your machine (internal) thermocouples are each calibrated and compensated no two machines will deliver eactly the same results. Here are your challenges: 1. Data acquisition equipment A-D converter errors 2. PCB measurement thermocouple (t
Electronics Forum | Tue Aug 31 13:23:37 EDT 2004 | frankracine
Thanks Ken for your reply. Concerning OSP, there are a few negative points that I must considered for our application. I've read all the following points in an Entek document. Never test it. - If you have a miss print and you clean the PCB, the co
Electronics Forum | Tue Oct 05 06:50:44 EDT 2004 | cabjerk
Hi All: Thanks for the feedback. I've did a lot of surfing for more info and found there are pro's and con's to each side. One side with the customer P/N your customer service doesn't have to worry if the others bump their builds ahead of your an
Electronics Forum | Tue Oct 26 10:49:00 EDT 2004 | Simon UK
Hi, > > I'm planning to get a new oven. I wanna > know the advantages and disadvantages of each > oven type over each other. I'm being told to go > for an 8 zone oven. > > thanks for your > help. > > regards, Depends really if you want a dua
Electronics Forum | Sat Nov 20 09:29:36 EST 2004 | JB
You are not giving the dimensions of the space to be used by your machines. So it's impossible to know what we are working with. But here is scenario for a very small floor space assuming that you can't have the equipment in a single line: I am ass
Electronics Forum | Fri Feb 11 08:00:36 EST 2005 | primus
Actually, I have never had the opportunity to discuss this with UIC. In fact, our Maintenance Engineer has told me that, according to UIC, the Set Command Variables should never be altered from their default settings except by qualified personel, and
Electronics Forum | Tue Sep 20 14:13:43 EDT 2005 | Rich
I use Cad2Cad v1.5 with Phillips Topaz. I don't know how much is differs, try this: Converting data to a Philips VIOS Text File format: 1. Open the pick and place data in Excel and format it to look like table 1. ** Make sure you delete the �mm�
Electronics Forum | Tue Nov 22 21:08:45 EST 2005 | davef
CMI International says, there are five basic, non-destructive methods of determining coating thickness. Each method was devised to achieve cost-effective, accurate, and repeatable results. Those methods are: * X-Ray fluorescence * Eddy-current * M
Electronics Forum | Wed Dec 21 08:31:13 EST 2005 | DannyJ
Hi AJ, First, I am not intimately familiar with your wave, but I will share some experiences I have had with other products. First, I would check to make sure that all of your heaters are working. Simply go to the electrical connections, remove p