Electronics Forum | Tue May 22 10:44:04 EDT 2007 | stepheniii
Are you using nitrogen with your wave? You probably will need to with selective. With our Ersa we need 99.9% pure nitrogen to make it acceptable. They spec 99.999% which means liquid nitrogen. We tried one board without nitrogen, it left a two in
Electronics Forum | Tue May 22 16:07:54 EDT 2007 | grantp
Hi, Thanks for all the info. Do you have a Nitrogen generator for the selective soldering machine? How does the cost of running that compare to the cost of keeping that big pot in the Delta wave hot? Have you ever experimented with check the costs
Electronics Forum | Fri May 18 11:58:47 EDT 2007 | ed_faranda
We're starting to get into BGAs at my company. I have worked with BGA with another company, but that was nearly 10 years ago now. One thing I haven't found is the required clearance around BGA components. Is there a standard for this distance? Wha
Electronics Forum | Mon May 21 10:21:39 EDT 2007 | aj
Hi all, Can anyone share the revised spec that they now recommend for PB-FREE Processing ? I have been told to request High TG rating ? should this suffice. any replies appreciated. aj...
Electronics Forum | Mon May 28 22:43:20 EDT 2007 | fazan83
You can refer to this link. http://www.merix.com/files/Lead%20Free%20Material%20Tech%20Bulletin%20Rev%20C.pdf Hope this will help.
Electronics Forum | Mon May 21 22:15:34 EDT 2007 | seb1970
Does anyone know where i can purchase a frame/stencil adapter for the MPM manual stenciler in Ohio? Preferably a air adapter. And also spare parts? Thank you for your help.
Electronics Forum | Tue May 22 09:37:11 EDT 2007 | jdengler
Hi Joakim, I do not know the QP242 table, but on our GP-341, CP-IV-2 and IP-III we make a plate from plexiglass with milled holes to show where the supports go for each board. This is not as fast as the Gridlock but does not cost nearly as much. J
Electronics Forum | Tue May 22 20:27:34 EDT 2007 | davef
What are the area and aspect ratio of the apertures that clog? When you print, you should be able to fit at least 4 of the mean sized solder sphere across the width or diameter of your smallest apertures.
Electronics Forum | Wed May 23 16:04:43 EDT 2007 | adlsmt
Does anyone have a version of software later than 2.04e_ps? SCS/Speedline will not supply it because the computer is no longer supported. Also, the laser pointer and the auto rail width seem to have removed themselves as options. Anyone know the mast
Electronics Forum | Thu May 24 12:45:03 EDT 2007 | pjc
SCS is not part of Speedline Tech anymore. Try contacting at: http://www.scscoatings.com/contact/index.cfm
