Electronics Forum | Mon Mar 30 12:52:45 EDT 2015 | grauen06
The PCB is in a housing when it is returned from the field and it takes 1.5 hours to remove the PCB from the housing so we are looking for a way to rework the BGA without removing it from the housing. Hence, top-side rework only.
Electronics Forum | Thu Nov 05 20:53:37 EST 2015 | shuttlestar
It's a strange task . if your PCB is very very small ,using topside heat is not a big problem . but for a whole PCB board . if delete the step of preheat, it will broke the whole PCB . BTW,do you finish your task ?
Electronics Forum | Wed Feb 25 07:55:27 EST 2015 | 3dpcb
We're developing a 3D printer for professional multi-layer PCBs with 3-4 Mil. traces. What concerns or questions would you have about such a system?
Electronics Forum | Wed Feb 25 11:47:09 EST 2015 | emeto
What are the chances for redesign the board or use substitute for the current tall part? Sometimes the hassle you want to go through could be avoided. How about change the box the device goes to or modify/ customize it to fit this part better in?
Electronics Forum | Wed Feb 25 12:01:15 EST 2015 | jasonnova
Welcome to the world of Contract Manufacturing. Unfortunately there is not an opportunity for redesign. This is a growing customer that we are training to involve us during the design stage to avoid production issues like this. The customer would
Electronics Forum | Thu Feb 26 04:21:50 EST 2015 | aj
Hi all, I am trying source a few spares for the above reflow oven, I am convinced their is plenty of life in the old dog yet.
Electronics Forum | Wed Mar 04 07:42:23 EST 2015 | daniel_esposito
Thank you Bob! I have followed your instructions and it is now running with "V CMD ENTER" at the HHT. Daniel
Electronics Forum | Thu Feb 26 21:35:21 EST 2015 | flyingsnow
Hi, has anyone experienced discoloration of cured non-conductive epoxy? It turned from white to deep red. The parts were returned from customer and we noticed the color change and wondered what could cause epoxy discoloration.Thank you!
Electronics Forum | Fri Feb 27 10:31:59 EST 2015 | mdang
We bought a use IP3 and we want to make adjustment in Y direction of the MFU. Is this proper setting or Mechanical calibration? Thanks, -Michael
Electronics Forum | Sat Feb 28 09:32:24 EST 2015 | assuredtech
That would be a mechanical adjustment however I would be a little suspect about why it is off and if you did your due diligence to isolate it.