Electronics Forum | Tue Mar 04 10:54:50 EST 2008 | vikkaraja
I think so,but what do you mean if hard drive is ok. Please explain.Computer boots up ok and machine even goes through it's complete intialization steps. I was thinking the same way as you are to start replacing one componet at a time. what do you th
Electronics Forum | Thu Mar 06 09:19:53 EST 2008 | d0min0
Two way to check a HardDisk: 1. run a dedicated software check (each brand should have one soft) or run a test-benchmark that You can easily find on web 2. make "ghost" image of HD and then replace a HD with same size (GB) and put the image on new on
Electronics Forum | Mon Mar 03 02:11:35 EST 2008 | andrzej
I am working on instruction for potential customer about PCB design guidelines to make it easy for wave soldering (not selective). I have experience and have already gathered some info but I still need exact information about dimensions and distances
Electronics Forum | Fri Mar 07 04:53:12 EST 2008 | vinitverma
Hi Wayne, First, all Gem machines including Topaz, TopazX, Sapphire, etc... have the same feeders. You can use either FV feeders (which were the ones when Topaz was introduced), or CL feeders (which came when Topaz X was introduced). Both types of f
Electronics Forum | Tue Mar 04 03:24:43 EST 2008 | reypal
I need some advise from those with experience on this component. We are facing soldering problem "pillow effect"(from cross section result)on this BGA. In the reflow profile point of view which area should we focused more? The soak time or the Total
Electronics Forum | Tue Mar 04 20:47:48 EST 2008 | davef
Available on the web, JEDEC PUBLICATION 95, DESIGN GUIDE 4.14, Ball Grid Array Package (BGA), Figure 4.14-3, Note 10: A1 corner must be identified by chamfer, ink, mark, metalized markings, indentation or other feature of package body, lid or integra
Electronics Forum | Tue Mar 04 11:20:56 EST 2008 | wayne123
I am unfamiliar with the Philips Saphire. I am needing to know if the feeders That work on our Topaz and Emerald will also work on a Saphire. I assume that they would just because the feeders are being sold as "Gem" feeders. In addition, Is anyone a
Electronics Forum | Tue Mar 04 11:28:46 EST 2008 | clampron
Good Morning, I have an application that we are tooling up for that has several LGA (Land Grid Array) components. The Gerber files from the customer has a solder paste definition of 1:1 to the pad. As I look at this part, I cannot believe that this
Electronics Forum | Tue Mar 04 20:33:21 EST 2008 | slthomas
Well, since you distinctly said *any* help.... as far as I know all of the GEM machine can use the original feeders, but there are as I understand it some newer smart models available for the X series machines. All I've actually used is a Topaz, th
Electronics Forum | Thu Mar 06 14:34:16 EST 2008 | srmlan
I have not had problems with ENiG panels, but they were made state side. We had Trace Labs cross-section them and found no problems. Whats this about yellow nails? Mine are full of grease from constantly having to fix the Jeep. I would try to pop my
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112