Electronics Forum | Wed Aug 10 11:57:16 EDT 2005 | pr
Is the peelable mask (put on by the boardhouse) flat on the surface of the pcb? If so can you tell me the material name, so maybe I can find a picture? We have to print adhesive on the board, so the mask has to be flat. That is why Kapton from the b
Electronics Forum | Wed Aug 10 11:57:41 EDT 2005 | jh0n!
I recently picked up a used GSM-1, 1994 or 1995 vintage. I'm in the process of setting up my first product on it - everything seems to be going well, however there's a constant inch or so offset on the X-axis. That is, when the board slides in, it'
Electronics Forum | Fri Aug 12 03:54:03 EDT 2005 | Mika
Does the pcba:s comes directly from the assembly line, You are going to do rework on? If faulty pcba:s comes back from, let say a customer from outside or the pcba:s has been on Your shelf for some days/weeks, exposed to open environment (humidity in
Electronics Forum | Wed Aug 10 20:49:27 EDT 2005 | bobpan
Quad/Tyco should have some old 'q-tips' on programming help for that type of board on a 'c-series machine'that i wrote a long time ago. I cant remember anymore exactly how to help you but they should have some paperwork on doing it. It also is a 'sli
Electronics Forum | Thu Aug 11 03:56:11 EDT 2005 | md
Guys, I have a 2.4mm pcb 8layer with a lot of copper on board. I am having some problems with solder not travelling up through the holes. Looking from the bottom of the board it looks fine . Also, To measure temp. of board through preheat zones
Electronics Forum | Thu Aug 11 08:56:20 EDT 2005 | pjc
Some causes of lack of top side fillets (hole fill) are: 1. Not enough pre-heat (a top side preheat will help, if no-clean flux, be sure to follow flux mfrs specification for top side board temp just before hitting wave) 2. Not enough flux 3. Flux i
Electronics Forum | Thu Aug 11 13:09:11 EDT 2005 | bman
In addition to Pete's fine tips, here's one we have successfully used in similar situations as long as you're using OA flux. Get some kind of pump action spray bottle (like hair spray comes in) and fill is with some of your wave flux. Use the bottl
Electronics Forum | Thu Aug 11 16:24:16 EDT 2005 | Sue PH
The soldering handbook that I use gives a 'rule of thumb' for best preheat temps for wave soldering. For multilayer brds that are metal core it suggests 110 to 130 degrees C topside temp to get the best solder fillet. We do a lot of multilayer meta
Electronics Forum | Fri Aug 12 14:11:20 EDT 2005 | pete_d
Bob, I've heard that many WSM manufacturers are not providing warranties for stainless steel solder pots that are holding SN100 because they are not completely confident that the SN100C alloy is non-destructive to the pot. fct�s own webpage states
Electronics Forum | Fri Aug 12 21:25:18 EDT 2005 | fctassembly
Hello Pete, Do you know how long Electrovert warranties their coated pots/pump equipment in use with SAC alloys? Also, does the warranty cover an operator scratching the surface while cleaning the pot in normal maintenance procedures? The good news
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112