Electronics Forum | Fri Feb 29 08:27:34 EST 2008 | tbkonrad
This morning I turned on our Qsv-1 and ai resiveved the following error. "Clamp did not open: House Air pressure may be lower then 70 psi" after checking the Air Pressure it reads at 80 psi on the Main air pressure gauge as well as the 80 psi on the
Electronics Forum | Fri Feb 29 16:42:34 EST 2008 | vikkaraja
Hello again, Has anyone experience any problem with their vision system on the DEK machine. Machine had been running fine for at least one year without any major problem until this week. Machine's response is very slow especially the vision system. M
Electronics Forum | Sun Mar 02 15:41:04 EST 2008 | jlawson
I set up some lead-free profiles on a new Heller1700xxx (Compact series), do not know if this is same model you refer to. Can be done, yes speed is a little slower than longer Heller Versions due to zones being so narrow, but doable. Of course all de
Electronics Forum | Sun Mar 02 16:01:28 EST 2008 | rfematt
Thanks for your information. What model year is your Heller 1700?. It seems that you can find same model (1700EXL) from 1999 to 2008 but there should be some differences between them which I don't know. Just want to make sure you are not running a ne
Electronics Forum | Mon Mar 03 13:09:44 EST 2008 | dyoungquist
We are using a Heller 1707EXL for both lead and lead-free assemblies with no problems. The zones can reach the temperatures needed for lead free. The belt speed can be adjusted so I'm not sure about your "run slow" comment. Maybe the 1707 is diffe
Electronics Forum | Mon Mar 03 13:56:15 EST 2008 | daxman
Resolved! Jeeze...just after I posted this question I got the machine working. Someone had removed the cable for the wide camera and connected it into one of the ports that is unused. I noticed this when looking at the schematic. The cables had
Electronics Forum | Mon Mar 03 13:08:53 EST 2008 | rrpowers
I have a couple old AP25 printers (circa 1994) that I inherited with an SMT process. I don't have a lot of details about the various parameter settings within the setup menus. I have the User manuals, but they only give very basic information. I i
Electronics Forum | Tue Mar 04 09:12:35 EST 2008 | davef
Q1. What would you recommend for the best practice or comparison? A1. We'd go with dip & look. It's easy and cheap, requires no advanced degrees in measurology. Have you reviewed "J-STD-002B - Solderability Tests for Component Leads, Terminations, Lu
Electronics Forum | Tue Mar 04 03:55:11 EST 2008 | aj
Hi All, I know this forum is not for spare parts but after the shock I got when I received a quote for a new CP6 nozzle head, I feel that some other company without much cash might benefit. I purchased some fuji cp4 & cp6 spares from a 2nd user dea
Electronics Forum | Tue Mar 04 10:42:45 EST 2008 | operator
We have a product that requires labeling and serial numbers that obviousely should be put on prior to conformal coating. 1.What kind of labels/ink/sharpe can be used under conformal coating without disolving etc...? We will be using Techspray 2103-1
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112