Electronics Forum | Wed Aug 16 21:48:24 EDT 2023 | dwl
Its been a long time and the brain is foggy but if I remember the F1 and B3 use the same software and are very similar other then the B3 is a benchtop and the F1 is in line. Camera resolution and the number of cameras are the things that might be dif
Electronics Forum | Thu Aug 31 04:56:44 EDT 2023 | auriga2001
I would start with the following possibilities and solutions: Add extra solder to the pads with a Camalot dispenser; or preformed solder slugs placed as an additional component if there is enough extra pad to attach it without interfering with compo
Electronics Forum | Mon Sep 04 10:15:41 EDT 2023 | tommy_magyar
As far as I can remember, these always arrived in flexible plastic trays. The trays we designed were made of Durastone. The parts were then transferred at a tape & reel facility from tray to tray every 1000x connectors. If these are high volume for
Electronics Forum | Thu Sep 07 10:27:23 EDT 2023 | poly
I bought a gx37 dual beam series 2 Genesis. It looks like it was in very good condition when it left Malaysia but the axis weren't secured at all for the sea journey. When it arrived the rubber stoppers had all been smashed. The z axis on both head
Electronics Forum | Thu Sep 07 15:20:58 EDT 2023 | rjroaquin6
Hello All, I recently had a case of excessive tin coming from a solder pot sample. The solder is SN63 but the results of testing had a 64.97% for Sn. The J-STD-001 spec is 61.5% to 64.5%. The pot is used to pre-tin wires which will then be solder
Electronics Forum | Mon Sep 11 08:22:56 EDT 2023 | richardcargill
A lot of MELF components have solder ends that stand slightly proud of the main body where your vacuum would lift them, so vacuum leaks are most likely the culprit. Upping the Vacuum to the nozzle may help, but better thing would be to modify the noz
Electronics Forum | Tue Sep 12 11:50:12 EDT 2023 | ttheis
I heard a similar story from a colleague on these machines. Same thing- head and beam not secured for transit and banged around whole trip. I think the beam ended up bent in that case and the machine could never be calibrated or repaired. Don't know
Electronics Forum | Wed Sep 13 12:50:44 EDT 2023 | kirill
Greetings, I would like to do a height calibration, because the laser of the machine seems to be out of control, I'll explain why: When I measure the height of a 0402 resistor, I get around -0.60 to -0.70, when I fix it on what the machines has measu
Electronics Forum | Fri Sep 15 09:26:14 EDT 2023 | georgegr777
Hello everyone, my problem is that my cp40cv pick&place machine is not loading the the machine software and on VME162PA242 card the "fuses" led indicator is blinking. Instead on my second cp40cv machine that works ok the fuses led i
Electronics Forum | Thu Sep 14 06:18:00 EDT 2023 | deniseburton
Hello, mcdvoice It seems like your Juki RS-1R machine's laser height calibration may be off. When measuring a 0402 resistor, it consistently reports heights around -0.60 to -0.70, causing pickup issues during production. Manually adjusting it to -
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112
winsouce.jpg)
