Electronics Forum | Mon Feb 19 14:07:27 EST 2024 | micropak
Sorry for late reply, I am having problems in accessing this forum. Kindly send me a PM / Email. On the Station computer, You should get your KONFIG.MA from C:SrDatenSrcMa folder and copy to a safe place. Next open the KONFIG.MA in Notepad and scrol
Electronics Forum | Fri Feb 23 10:10:32 EST 2024 | emanuel
Well, the story is a little more complicated. The product is also an LED lamp made on an aluminum PCB with the LEDs on one side and the drivers on the other. The board itself is not big, about 90x90mm and most of the components are soldering well. Us
Electronics Forum | Fri Mar 08 15:38:38 EST 2024 | tommy_magyar
If you have any kind of inspection, record any faults found. If you've got an RMA process, record any faults found. Should rework and/or RMA's hit unwanted numbers, you may want to include additional inspection in your product documentation during bu
Electronics Forum | Mon Mar 18 08:57:09 EDT 2024 | carl_p
I think most AOI's - the programming time will depend on the route you pick to go about it. Will you use a generic database or break things up to allow more flexibility etc. If you can get away with one database then once that is complete (or big e
Electronics Forum | Tue Mar 19 11:54:56 EDT 2024 | tommy_magyar
Hi there, I've been happy with the iiNeo and iiNeo+ from Europlacer, both have the capacity of 8*33 8mm feeders (264 slots in total). It can build boards up to 505*360 mm (our biggest PCBA, maybe it can do bigger one too). 6 and 12 monthly services
Electronics Forum | Tue Mar 19 12:48:12 EDT 2024 | jdengler
When we were selecting our AOI I made 3 test boards. 2 of them were "golden boards". These 2 had different shades of green solder mask as I had been told this could cause some issues. I did not encounter that during our selection. The 3rd board ha
Electronics Forum | Tue Apr 02 14:56:30 EDT 2024 | kingkelvin
Hi all - my problem is a bit worse now - I can get all hydra tests to pass in extended service, except indicator levels at current 7 a bit high past 190 limit at ~210-220 - other than that hydra bank re-installs OK - but still it makes a bad hitting
Electronics Forum | Thu Apr 04 11:31:30 EDT 2024 | spoiltforchoice
With older machines you need to know their service history and working hours. Plenty of 10+ year old machines have done very little work and could easily do another 10 years the same. Other have worked non-stop on multi-shift lines, if something expe
Electronics Forum | Mon Apr 08 15:39:10 EDT 2024 | mistrthou
The error is: MOT-Command/205: Motor speed out of control Motor speed deviates from expected speed. – Problem with power supply, motor current too low. – Mechanical problem, friction too high or tool stuck in Z. I'd be looking at excessive friction
Electronics Forum | Thu Apr 11 16:23:20 EDT 2024 | cyber_wolf
I have been in the arena with both new and used. The 10 plus year old Juki's are solid machines unless someone neglected PM's. However...if something breaks and you can't repair yourself or source to third party, Juki will stick it to you. They ma
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, 30 China
Phone: +86-138-29839112
winsouce.jpg)
.gif)
