Electronics Forum | Tue Mar 17 09:09:34 EDT 2020 | emeto
You should be able to operate/troubleshoot machine on its own. Not sure if you have to switch some key on the back to change the mode, or it will initialize on its own using the last program that has been loaded....it's been awhile. Line computer dow
Electronics Forum | Fri Mar 06 02:25:08 EST 2020 | bukas
it is not that big deal. you can use almost any generic grease. I use SKF bearing grease on CP45FV's. Just make sure you remove old grease, I use IPA and compressed air to do this. And don't put too much of it or too little. After greasing everything
Electronics Forum | Fri Mar 06 08:51:07 EST 2020 | richardcargill
We have mainly Philips equipment and use Alvania almost everywhere in them. Ball screws/linear rails etc . As has been mentioned, just clean as much of the old grease off as you can, then regrease and put the machine on a warm up cycle. We do this m
Electronics Forum | Tue Mar 10 04:37:44 EDT 2020 | luciano_zhang
I have a files need produce in a urgent time. It's 4 layers PCB with 3 OZ inner and out layer quantity need 10000pcs ,any one know which supplier is aviliable?
Electronics Forum | Thu Jun 11 09:28:57 EDT 2020 | pcbkathay
Dear Luciano, We are PCB manufactured based in China,we can produce the PCB as your requirements as soon as we can, please send the files to my email 284816044@qq.com looking foward to your email.
Electronics Forum | Thu Mar 12 23:10:12 EDT 2020 | colinbenton
I need some PCB orders be assembled in Mexico, with both prototype and large orders. I've learnt that most of the fabs are located in Guadalajara,I found some in SMTNET, and emailed to them with no reply . Can anyone recommend some reliable assembl
Electronics Forum | Mon Mar 16 02:23:00 EDT 2020 | colinbenton
Hi Steven, Only assembly is required, we can provide PCBs and parts. The reason why we need them be made in Mexico is because, most of our parts will be shipped from the US, and it only takes 1-3 days from Mexico to the US. Or if there is any US as
Electronics Forum | Thu Jun 25 22:34:44 EDT 2020 | daisy_mu
Hello I am working in a PCB assembly company, we are located in Guanajuato, Mexico. We have an SMT line and assembly. We are Katolec de Guanajuato, you can see the information at https://www.katolec.com/ or you can send an email to marcelo-higa@kato
Electronics Forum | Thu Mar 19 16:06:29 EDT 2020 | stephendo
Imagine a circle. Now imagine a line attached to that circle. A line almost as wide as the circle. Or look at a regular BGA pattern now imagine if the traces were almost as wide as the pads. I have not seen any quite as bad as he describes but I have
Electronics Forum | Tue Mar 24 10:34:03 EDT 2020 | slthomas
My experience with our process is that those parameters would result in a big bridging problem. I'm working with a stencil designer at our fabricator on an asymmetrical aperture design that hopefully balances forces enough to keep the parts centered.
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
2747 Loker Ave West
Carlsbad, CA USA
Phone: 18002796835
