Electronics Forum: entek (Page 1 of 11)

En-Tek Coating

Electronics Forum | Tue Oct 06 15:50:12 EDT 1998 | Bill Tuttle

We are experiencing poor wetting on various components placed on a PCB with En-Tek coating. Is anyone else experiencing simular problems ? We have the following questions: 1. How can the thickness of the En-tek coating be measured? 2. Is En-tek vol

Can the old datecode Entek PCB be converted to HASL ?

Electronics Forum | Wed Jul 04 10:40:51 EDT 2001 | nifhail

I have thousands of old datecode PCBs which has an Entek and HASL finished. Entek PCBs are about 6 � 1.5 years old and HASL boards are at 1 - 2 years old. To make it worse, some of them came in the loose form, no vacuum seal� nothin�. As for the HA

Cleaning of Entek Boards

Electronics Forum | Thu Jul 18 21:04:06 EDT 2002 | davef

So, why can't you clean misprints on Entek boards? Entek: Cheap, flat, OK shelf life, not without process and fabrication issues. Your Entek organic solderability protection is probably Entek Plus [CU106A] made by Ethone OMI. Consider getting a co

Entek OM

Electronics Forum | Fri Mar 04 08:29:53 EST 2016 | esoderberg

Anyone using Entek OM final finish to replace HASL & ENIG?

OSP's

Electronics Forum | Thu Jan 29 14:03:57 EST 1998 | Chrys Shea

Entek or Protecto? I've hear Kester's Protecto is a very good OSP that may be more assembly process-friendly than Entek. Is anyone using this? Do you have any feedback on its solderability or availablity compared to Entek? Any non-commerical input w

Immersion Ag

Electronics Forum | Mon May 13 14:15:46 EDT 2002 | davef

Entek is Enthone's OSP [organic solderability protection]. It is widely used in the PCB fabrication business. Imidazole (Via Systems) is good, but is not as widely available. Search the fine SMTnet Archive on: * OSP * Entek CU-56, Entek Plus CU-10

Cleaning of Entek Boards

Electronics Forum | Thu Jul 18 02:13:40 EDT 2002 | computer

Hi, Currently my company is running entek coated boards. But whenever there is a misprint, we cannot wash the boards as it would diminish the coating. Is there anyway to clean the boards without removing the coating or is there a way to re-coat

ENTEK CU56

Electronics Forum | Wed Oct 20 16:55:26 EDT 1999 | NickMata

Hello all, I am trying to get some information on ENTEK CU56. I am planning to use 310M flux on ENTEK 56 cards. It will not be a double reflow (top/bottom) followed by wave. I plan to reflow, glue/cure then wave. I am concerned about burning off the

PCb vacuum seal puncture

Electronics Forum | Thu Jul 18 12:05:19 EDT 2002 | yngwie

Experts, Today I received PCB in a punctured vacuum seal bag. the Humidity indicator change the colour to pink at 60%RH mark. The brd finish is Entek. Earlier our intention to get the board vacuum seal is because we want to ensure that the is no fr

How to calculate the ROI

Electronics Forum | Fri Jun 29 05:50:27 EDT 2001 | nifhail

Thank Dave, your information was really helpful. Now that I have another few thousands of old datecode PCBs which has an Entek and HASL finished. Entek PCBs are about 6 � 1.5 years old and HASL boards are at 1 - 2 years old. To make it worse, s

  1 2 3 4 5 6 7 8 9 10 Next

entek searches for Companies, Equipment, Machines, Suppliers & Information

SMT spare parts - Qinyi Electronics

Reflow Soldering 101 Training Course
Selective soldering solutions with Jade soldering machine

Wave Soldering 101 Training Course
Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

Best Reflow Oven
Pillarhouse USA for handload Selective Soldering Needs

Training online, at your facility, or at one of our worldwide training centers"
PCB Depanelizers

Low-cost, self-paced, online training on electronics manufacturing fundamentals