Electronics Forum | Mon Dec 19 15:53:21 EST 2022 | kumarb
Thank you Chris. Did not know that till now. Found the default above password faster on this forum than factory support. Very much appreciated. Thanks again.
Electronics Forum | Thu Jun 14 11:43:52 EDT 2001 | gsmguru
Change times for the Rheo pump are probably a little slower than just swapping blades. You have to hook up the sensors & air lines,remove the bottom cover + charge the pump to get it to operating pressure before you can print. I would guess that if y
Electronics Forum | Mon Jan 03 11:00:25 EST 2000 | Brian W.
At my last company, we installed in-line testers. They worked very well, but there were some issues to be addressed; 1 - Boards had to be cool enough to go through ICT or we had false failures. 2 - We used no-clean flux...enough said about that. 3
Electronics Forum | Fri Nov 05 21:41:46 EST 1999 | chartrain
Temperature vs time is what soldering is all about. The faster you run your conveyor, the more heat will have to come from the pot for a given assembly. Example: You heat the board to 200F top side through the preheaters. Eutectic 63/37 melts at 361.
Electronics Forum | Tue Apr 09 08:49:43 EDT 2002 | davef
Hey Bud. Allow me to 'turn' your point about 'grain structure' just a bit. Fast cooling rates / coarse grain structures was a bit of red herring in the early 80's. Faster cooling DOES produce finer grained solder connections. Accelerated testing of
Electronics Forum | Fri Mar 05 08:47:32 EST 2004 | Ian White
Hi I work for tyco in Uk and have worked with Both 1030 and 1025 machines. The 1025 is the latest version of Mirae machines and the main diffeerence is that the machine is supplied with Linear Motors providing faster X,Y movement and more repeatable
Electronics Forum | Fri Sep 23 08:27:28 EDT 2005 | siverts
The 7 spindle Flex jet head, can only pick max 7 comps. from the GSM base machine in a single operation, not from the shuttle. The Flex jet head is faster in z-axis and will also use the OTHC (On The Head Camera) to inspect most of Your smaller comps
Electronics Forum | Sat Jul 08 14:34:27 EDT 2006 | grantp
Hi, I would go MYDATA rather than an "entry level" machine. The MYDATA low cost second hand units run the same software as their top of the line units, as well as taking the same feeders, so if you want to go faster and upgrade to a faster model, y
Electronics Forum | Wed Nov 15 15:51:21 EST 2006 | RJ K.
I have been looking into buying a rework station like ERSA or PDR. What I am questioning is how well will these systems reflow BGA's with metal top/cover that are reflective. In addition, when preheating the board would dark body packages absorb te
Electronics Forum | Wed Aug 27 14:38:20 EDT 2008 | rgduval
Does your paste provider recommend a TAL? For the leaded and lead-free pastes that we use, the manufacturer recommends 60 seconds above liquidous. I note that your profile shows the TAL as 30 seconds, which may not be sufficient. That said, tho
