Electronics Forum | Fri Feb 01 12:52:31 EST 2013 | ericrr
Interesting enough, it did turn out to be alignment, maybe the machine is getting bend & twisted just like people do when they get old....... or maybe I should say as the beam gets less intense with old age the sensor needs to be readjusted to pick u
Electronics Forum | Fri Feb 01 18:23:30 EST 2019 | slthomas
Is it indexing at the correct pitch when you push the forward button? I really can't remember much about those machines but it seems like that's an indication that it's not programmed correctly. I'll be bobpan knows, regardless. ;)
Electronics Forum | Sat Feb 02 04:48:30 EST 2019 | dfl
yes it's moving at the wrong pitch, about 3 components a time. Is the programming you talking about at the microcontroller AT85C55 or that serial memory 24C04? Or there is some procedure on the Quad to adjust this?
Electronics Forum | Mon Nov 25 20:52:47 EST 2019 | cbeneat
Are the arms pulling the cart all the way in? Possible part blocking the limit switch. does the cord have power? If I remember correctly, we once had to adjust the mechanical stops on one of ours so it would make the switch.
Electronics Forum | Tue Mar 24 14:59:45 EDT 2020 | namcom18
I have a spare Mirae MPS20-TFUIII unit in working order on a scrap machine, does any one know what its worth as I have been offered $1180 for it is that a good price?
Electronics Forum | Sun Jun 14 19:41:35 EDT 2020 | yakout
hello michal have a nice day i need to adjust the pitch from 4mm to 8mm
Electronics Forum | Mon Jun 15 23:19:38 EDT 2020 | kylehunter
You literally just loosen both hex bolts and slide the bar to the pitch you want. Then tighten the bolts. You can also remove the bar, and flip it over to get additional pitches.
Electronics Forum | Wed Jul 28 00:02:29 EDT 2021 | mpatel2021
Hi Thanks for Your help but didn't work. look like previous operator had change that password and now i can't change anything.
Electronics Forum | Fri Oct 01 00:49:33 EDT 2010 | darrenj
Yes, we have the Agilis stick feeder and it is a definite improvement on the vibe. It usually comes with a set of starter 'tubeforks', but i bought another starter set after a while since the individual tubeforks are relatively expenisive. Always g
Electronics Forum | Tue Aug 24 00:37:49 EDT 2004 | Justanobody
Look into the Multi-Job Line Balancer. You select a group of products that you want to run and WHAM-Oh! A setup sheet is created that tells you what you need to move once you run out of room or a part number is no longer needed. Contact Fuji America
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
.gif)
