Electronics Forum | Mon Aug 08 06:17:09 EDT 2005 | Hi Steven
My suggest is using Ersa IR55A or IR650A. http://www.ersa.de/en/ If you looking for your quality, you need this system. I had try it many time, is better then hot air. and you can set the profile as you like, even Flat Peak on the Lead Free Rework.
Electronics Forum | Tue May 11 12:23:40 EDT 2004 | Mark
Just wondering about feeders 8x2 with .7 nozzles and cover. Wondering if anyone that reads this has any extra feeders for sale or know of a house with some for sale? Got some 0402 coming my way and we only have 8x4 with 1.3 covers and 1.0 covers.
Electronics Forum | Tue May 11 17:50:41 EDT 2004 | longpham246
Just wondering about feeders 8x2 with .7 nozzles > and cover. Wondering if anyone that reads this > has any extra feeders for sale or know of a house > with some for sale? Got some 0402 coming my way > and we only have 8x4 with 1.3 covers and 1.0
Electronics Forum | Fri Apr 23 11:42:30 EDT 2004 | patrickbruneel
Thanks for the answer. what i believe happent is that the manufacturer of the paste reduced the tackiness of the paste to eliminate the squeegee sticking problem, and now with the reduced tack its a lot easier for the powder particles to break off du
Electronics Forum | Fri Apr 23 13:56:57 EDT 2004 | Robert
Hi all Does any one know problem with solder joint call crystallised joints. I have noticed that sometimes on our PCB when i look at the joints for example chips, LCCC, there are areas not smooth solder (very often in the center of the solder joint)
Electronics Forum | Wed Apr 28 12:13:57 EDT 2004 | Jack
You can find the procedures for different package types in the IPC-7711 & 7721 manuals. These can be purchased from the IPC.[http://www.ipc.org/] You can also try Circuit Technology: http://www.circuittechctr.com/guides/guides.shtml These manuals and
Electronics Forum | Mon Apr 26 14:42:47 EDT 2004 | Kirk
so the first PCB if i want to aligned with stencil is manual the same for screen printer without vision and vision starts work for next boards? or i am wrong? but if i make mistake during aligment process for the first PCB i will repeat it for next P
Electronics Forum | Tue Apr 27 14:54:26 EDT 2004 | Kirk
reduction apertures in stencil and question how find center?. I thought that vision start playing important role at the beginning for the first PCB, help set precisely printing process. You gave tip to work without Mylar. Ok but again how you set ste
Electronics Forum | Thu Apr 29 13:27:36 EDT 2004 | Kirk
Is it possible to put PCB to the screen printer with vision and on the board put sheet of paper then make print on the paper and it is the reference then i teach vision for example fine pitch aperture then remove paper and align PCB? We have semi-a
Electronics Forum | Thu Apr 29 14:41:12 EDT 2004 | pjc
OK if the paper is transparent and you can adjust the table X-Y-Theta under the paper- without moving the paper - the align with the solder lands on the board. If you have a DEK or MPM machine, the Mylar frame is like $300. I belive other printer mfr