Electronics Forum | Tue Apr 30 21:35:36 EDT 2013 | cpcompany
Fraud, Danny Finally you shut down your phone and ran away because I am flying to Singapore. I will find you and put you in prision. You shall not put your feet in this business anymore. I will watch you wherever you go and stop you doing fraud! Ev
Electronics Forum | Fri Mar 01 10:45:54 EST 2013 | jaimebc
We currently have a problem with our Universal GSM 2. A part ins presented to the front or back camera but there is no image of the component. Just a dark screen, even though the light system is working. Any ideas on what the problem may be? I suspec
Electronics Forum | Fri Mar 08 04:27:03 EST 2013 | grahamcooper22
Homemade cabinet may sound like a simple solution but you need to think about making sure the RH is always less then 5% and everything must be ESD safe....ESD is more of an issue at LOW RH levels...so the glass / plastic in any door needs ESD coating
Electronics Forum | Mon Mar 04 13:48:53 EST 2013 | orlando216
Greetings to all, I have the following problem with an IP-3 from Fuji, At display is says: Cannot Move: X1 Axis Feeding aborted Servo Alarm X2 AXIS Servo Ove
Electronics Forum | Mon Mar 11 04:57:31 EDT 2013 | bobpan
You really should edit your programs in central controller where it is much easier to follow the commands shown and to follow the extent data to see whats attached to each part/pickup. The hht can quickly cause issues when the wrong button is presse
Electronics Forum | Tue Mar 12 05:01:09 EDT 2013 | bobpan
The only thing that makes sense is a problem with the program you are working on. Can you edit another program and will it save? You are seeing the same thing happen when you use the machine as and editor or central controller....this makes no sense
Electronics Forum | Tue Mar 12 09:23:52 EDT 2013 | bobpan
If you edit the sequence on the hht.....to fix your problems...you then have to upload the data to central controller. If you are not doing this....you are overwriting the data on the machine with bad data everytime you download to the machine. The l
Electronics Forum | Tue Mar 12 09:24:47 EDT 2013 | bobpan
If you edit the sequence on the hht.....to fix your problems...you then have to upload the data to central controller. If you are not doing this....you are overwriting the data on the machine with bad data everytime you download to the machine. The l
Electronics Forum | Mon Mar 11 09:46:04 EDT 2013 | cyber_wolf
The surveyor is a a plate that I use to "survey" or verify the oven on a weekly basis. The data logger or profiler is the actual unit that follows the board through the oven to take readings. I don't think the zone thermo couple that measures temp a
Electronics Forum | Wed Mar 13 09:11:48 EDT 2013 | smt_guy
Hi All, Need your advice / help. We have assembleon pick-and-place machines and we got some pick-up issues on certain LED's that are Dome Type. The LED's get off from the tape pocket during feeding due to the dome of the LED sticks on the tape surfa