Electronics Forum | Thu Apr 04 11:31:30 EDT 2024 | spoiltforchoice
With older machines you need to know their service history and working hours. Plenty of 10+ year old machines have done very little work and could easily do another 10 years the same. Other have worked non-stop on multi-shift lines, if something expe
Electronics Forum | Mon Apr 08 15:39:10 EDT 2024 | mistrthou
The error is: MOT-Command/205: Motor speed out of control Motor speed deviates from expected speed. – Problem with power supply, motor current too low. – Mechanical problem, friction too high or tool stuck in Z. I'd be looking at excessive friction
Electronics Forum | Thu Apr 11 16:23:20 EDT 2024 | cyber_wolf
I have been in the arena with both new and used. The 10 plus year old Juki's are solid machines unless someone neglected PM's. However...if something breaks and you can't repair yourself or source to third party, Juki will stick it to you. They ma
Electronics Forum | Fri Apr 26 08:20:51 EDT 2024 | radek
Hello, We recently acquired a used Viscom S6056 DS1W machine which is currently not operational. The initialization fails and we are encountering a repeated error: "D0, Vtrans command invalid." This error is also appearing with codes D4, D5, and D6.
Electronics Forum | Fri May 10 01:30:15 EDT 2024 | nicholascarson
Access the Calibration Screen: Navigate to the system settings menu on the HMI and find the calibration option. This may require entering a password or accessing a service mode, depending on the machine's security settings. Begin Calibration: Once
Electronics Forum | Mon Apr 01 19:57:07 EST 2002 | davef
Selective soldering machines are a good way to "finish automation", if the design of the PCB is conducive to the application with just a few components to solder. Your points are good. A decision matrix for selecting a machine might also include:
Electronics Forum | Fri Apr 30 08:28:39 EDT 2004 | davef
Roger Saunders, President Saunders Technology, Inc wrote a fairly unbiased paper that compared different thermocouple attach methods. You can probably find it on their site. In it, about gluing thermocouples, he says: There are two general classes
Electronics Forum | Sat Feb 02 18:30:35 EST 2008 | mika
File meny > Save for the Web. I know that the Adobe Photoshop is not in every man's hand. Even though I know that there is a some good free-ware that can do similar to this, converts for ex. a jpeg to a smaller size jpeg, without to loose to much of
Electronics Forum | Tue Aug 31 17:36:36 EDT 2004 | davef
NO-LEAD COMPONENTS WITH LEAD SOLDER ISSUE: We agree with Russ. We've dicussed this several times on SMTnet. For instance, look here http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=25394 LEAD COMPONENTS WITH NO-LEAD SOLDER ISSUE: We disa
Electronics Forum | Wed Jun 03 22:07:41 EDT 2009 | davef
= 0.66 aperture opening to the stencil wall has been shown to provide the best transfer efficiency and repeatability of the deposited paste. Values from 0.66 to 0.8 insure a good paste release from the stencil. The biggest impact on area ratio is the
