Electronics Forum | Tue Apr 15 11:58:20 EDT 2014 | superlen
Sarason, I will send you some samples. Note, however the .pcb file has a LOT more information in that just placement data, it has vision code definitions, part specific fields such as number of pick retrys, pickup/placement delays, speeds, feeder xy
Electronics Forum | Mon Apr 14 20:13:40 EDT 2014 | davef
So, someone is going to get a chance to buy a nice and shiny oven, eh? Summary from my notes of old thread on SMTnet: Some people melt sugar and use that solution to clean cooked-on flux residue. Dissolve sugar into warm water, spray it on the area t
Electronics Forum | Tue Apr 15 15:12:50 EDT 2014 | bradlevy
Thanks Bob. I just didn't have enough experience with production SMT (vs hand-soldered prototypes) to know how finicky some things like this are. I've tried to do a lot of reading, but I haven't seen much that talks about things like this. I also hav
Electronics Forum | Thu Apr 17 04:57:54 EDT 2014 | eoghan
Hi all, I posted this about a fortnight ago so apologies for reposting but I'm not too sure what else to do as I've searched everywhere. I've got an older Jot router J501-21 that has had a hard-drive failure and operating software is gone. I've been
Electronics Forum | Thu Apr 17 11:59:59 EDT 2014 | briantmc
Hi all. A "newbie" on the forum, hopefully someone can help! I have a Quad IVc that has developed a problem on its Theta Axis. In performing the Homing routine it does not spin the nozzle through 360 deg as it should. It does a small turn ~45deg o
Electronics Forum | Thu Apr 17 16:55:32 EDT 2014 | bobpan
Hello, The only thing i can think of is the x&y ribbon cables. I know you said they are good but they could have an intermittent break. I would get a spare set and plug them in with the machine at a slow speed setting and see if it works as normal. A
Electronics Forum | Thu Apr 17 17:57:13 EDT 2014 | proy
Hello We use a 5 zone conceptronics HVN70 and never before have we had something we could not do including 6 layers Rohs complicated boards. Recently we had a larger - simple 2 layer board - all 1206's etc however there are 15 pcs of a LARGE high m
Electronics Forum | Wed Apr 23 09:38:05 EDT 2014 | rgduval
Get in touch with your paste manufacturer. They should have a data base of different oven types/zones, and can give you "baseline" settings for a medium thermal density board that has been proven to work well with their paste. After that, it sounds
Electronics Forum | Tue Apr 22 08:55:54 EDT 2014 | davef
I assume that you're talking about wanting to solder to metal tabs that are spot welded to the battery terminal. These tabs are not meant to be soldered. The metal was special selected for welding. In the old days, you could buy plumbing flux at th
Electronics Forum | Sun Apr 27 07:13:25 EDT 2014 | recard
Hi, we have plans to build up a SMD manufacturing line and would like to get your feedback what is best for us to choose. We are outsourcing about 50 different products which are more or less low series (up to 1000 pieces). Boards are very different