Electronics Forum | Fri May 08 17:55:37 EDT 2020 | cyber_wolf
The squish is determined by the spring in the nozzle. If Z0 or table level is out, you would see it on more than one component..most likely Make sure board thickness and component height are correct. Also make sure you have board support installe
Electronics Forum | Wed Aug 25 21:41:12 EDT 2021 | same problem
I'm having same problem with one of my CP-642s. We checked cards and now the monitors are not turning on.
Electronics Forum | Mon May 13 19:47:37 EDT 2002 | bcceng
Mladen, I am in contract manufacturing using the regular Philips Topaz. I started with one now I have four, if market ramps up will be getting more. The Topaz regular can place 0201,BCC,BGA's,Micro BGA's and others depending on the configuration of
Electronics Forum | Thu Jul 20 12:05:44 EDT 2006 | vikkaraja
Hi there to all, I have noticed one of my cp is making very loud thumping sound from the table lately. This noise is only from X-axis not the Y at all. Here are the following things that I went through so far: checked if this was due to lack of lub
Electronics Forum | Thu Jan 17 09:55:44 EST 2008 | cyber_wolf
Bill is no longer with SMT Research. The camera cal/replacement on CP6 is better off left to the pros.Unless your techs are VERY familiar with the procedure. Call Greg Frazier @ 704-995-4591 he is with SMT Resource. Greg has done work for us in the
Electronics Forum | Thu Mar 19 10:42:53 EDT 2015 | markhoch
You're attempting to place 01005's with a Fuji CP8? I'm curious to know how this turns out. I wouldn't think the CP8 has feeders that are capable or the accuracy needed. I could be wrong... I've been out of the Fuji CP arena for about 15 years... I
Electronics Forum | Thu Dec 27 11:07:19 EST 2007 | kpm135
Can anyone tell me the differences between the CP6-4000 and the CP643? Is the CP643 able to place a wider component range? Does the CP643 have some sort of vision system while the CP6-4000 doesn't? If anyone has the Fuji Specs on the CP643 and could
Electronics Forum | Wed Nov 03 08:29:33 EST 2004 | Tim Goodman
well to add to your information .you are correct that you will get a cp8 instead of a cp7 and its cheaper.the cp7 range has been replaced by the cp8 because of the y 2 axis control that allows beter pickup of 402 and 0201 components.my moneys on the
Electronics Forum | Fri Mar 03 11:24:08 EST 2006 | Ken
I would appreciate comments from anyone familiar with Fuji CP6's and CP6E's. Essentially, I would like to understand the important differences between these two machines. Considering that we use FujiCAM as a programming tool, does a CP6E require a
Electronics Forum | Tue May 15 13:43:43 EDT 2001 | Stefan Witte
I have never seen a CP 743. Was it hidden in the Fuji fort? I know a CP 643 though. Stefan
.png)
