Electronics Forum | Fri Sep 19 10:20:43 EDT 2008 | stepheniii
You are making sense. And no you can't go from centroid data to a program at the machine automatically. You can type in the numbers if you want but the machine won't turn centroid into a placement program. Don't you have PanaPro? I thought there w
Electronics Forum | Tue May 18 16:40:22 EDT 2010 | m79d
I am having some problems getting the IP1 to place a SSOP28 package,pitch 0.65mm lead width 0.3mm. I am selecting computer vision 012 (tried 011) and vision type 100. EL data was put in looking at the datasheet and also measuring the device. Have tri
Electronics Forum | Thu Aug 04 22:02:25 EDT 2011 | fujiphil
IP3 camera calibration, you need the following: 1. Part camera resolution Jig. 2. 10mm nozzle for nozzle centering. 3. Button jig (skip). 4. Glass board and Glass parts. 1. Conduct the Camera resolution. Set the following Delta values: X=+/-0.1mm;
Electronics Forum | Mon Mar 05 13:35:04 EST 2012 | acsscott
Figured out that you have to press Ctrl & Enter to get this screen to come up. Also, to remove the LCS, you need to remove the "Y" cable to the left of the control box in the bottom of the Topaz X. All works well now, but still can't get it to load
Electronics Forum | Mon Aug 17 17:01:31 EDT 2020 | rgduval
+1 to what Sr. Tech said. I'd also add that you could have some uneven deterioration of the centering jaws. Check by doing a couple of things (this will help check if the tool/tip is bent/deteriorated as well): 1. Turn off mechanical centering, and
Electronics Forum | Thu Sep 02 17:01:30 EDT 1999 | Brian
| | Do any SMTneters out there have a good solution to substitute SMT parts that you are willing to share? I presume all of us have the issue where purchasing wants to buy "the same part" from a different vendor. While the part may be the same electr
Electronics Forum | Tue Sep 07 08:04:59 EDT 1999 | JC Leigh
| | Dear all, | | | | I don't know if I'm asking at the right place here, since you all seem to be more focused on process problems then programming problems (or perhaps programming isn't a problem for you). | | | | I'm using FUJI CP642's and I've
Electronics Forum | Wed Sep 22 20:57:46 EDT 1999 | JAX
| | Question for you SMT guru's out there. | | | | What is the best way to support boards on Fuji's CP6 machine's x-y table...particularly for 2nd side SMT where the support side already has parts... I am toying around with the following methods: |
Electronics Forum | Wed Sep 16 16:03:36 EDT 1998 | Ben Salisbury
| | | Has anyone used Fuji's rubber tip nozzles for the IP3? Are they O-ring type or suction cup? I'm having trouble picking up Ompacs due to the top of the part not consistently being flat. Any actual experience with these $1100 nozzles would be a
Electronics Forum | Fri Mar 03 07:03:57 EST 2006 | Mity-C
Good Morning All, We have a Mydata shop. 5 lines in all. We are also using a mix of old style and Agilis feeders. The claim that you will not loose parts in loading is based on keeping the clip with the reel. This is the whole basis of the Agilis co