Electronics Forum | Fri Jan 13 12:36:48 EST 2023 | servin6154
There are a couple of things you can try that seemed to help me with this problem. 1.Get your HMS height off of the paper tape halfway between the pocket and the edge of the tape. 2. Change your "pick stroke" for that part to "0" 3. Check you compon
Electronics Forum | Tue Jan 31 18:50:01 EST 2023 | markhoch
You might want to look into the Vorne XL Productivity Appliance. You connect it to your line by connecting it to a sensor that will trigger an input. (I used the exit sensor on the pre-reflow conveyor). It's probably the most cost effective productiv
Electronics Forum | Fri Mar 24 15:35:58 EDT 2023 | cyber_wolf
All of these components were replaced under warranty. I cant remember how long that was. I was working with the very first My12's. This machine was never reliable and there was always something broken. Anywhere I have ever been that had MY series mac
Electronics Forum | Fri Apr 21 14:58:04 EDT 2023 | rgduval
I mean...there are a ton of possibilities for bridging on selective solder before you ever get to alloy purity. Are the bridges happening consistently in the same spot? Are the leads too long? Can you modify the approach/exit/peel off to address? Wh
Electronics Forum | Thu May 25 01:46:10 EDT 2023 | frankchan
Hi, I would recommend something from 21 Century at least. Considering it's mostly small batches there's no reason to raise the budget to purchase the Newest series. I think the principle here is something that'll do and do a nice job. If you are a Ya
Electronics Forum | Tue Jun 06 00:53:55 EDT 2023 | frankchan
Hi Rob, my previous offer to you assumed you would stick with Yamaha, if others suit you then we could also supply. If Why no one recommends Samsung/Hanwha you ask, from the seller's point of view, Samsung's market is majorly in China, with about 2~3
Electronics Forum | Mon Jul 03 16:47:19 EDT 2023 | calebcsmt
Well noted - and makes sense. Though 'technically acceptable' from an electrical/functional stand-point, unless it was called out within documentation/discussed with the customer, it should still be looked at as a defect, since otherwise its very amb
Electronics Forum | Fri Jul 14 17:32:36 EDT 2023 | ttheis
Having an issue with changing nozzles on one of our FJ3 heads. We get errors on spindle 5 and 6 when bank-changing nozzles. Event code 31208, unable to find any info on this code. When we use the put nozzles away routine it does it no problem but has
Electronics Forum | Tue Jul 18 16:49:49 EDT 2023 | mahasg
Hello All, I am PhD student at polytechnique Montreal. We have a CQFP44 packages and Dies of 51um pad pitch (22nm FDSOI tech) that I need to bond myself at the university using ASM Eagle Xtreme gold wire bonder in the university. we need to perform b
Electronics Forum | Tue Aug 01 20:50:03 EDT 2023 | calebcsmt
If it was only 1 or 2 components on a reel that were backwards, I would lean more likely the cause just being the component was wrong direction in Tape from factory. Not much you can do from a Pick & Place perspective, generally.. Most machines use