Electronics Forum | Mon Sep 01 12:37:52 EDT 2008 | vladig
I would do just that (and eventually will), but I've been just trying to give "free advices" so to say. What I've been suggesting is a typical way to solve a manufacturing problem. Please let me knw if you think I'm confused. Regards, Vlad
Electronics Forum | Tue Sep 02 14:59:41 EDT 2008 | hermes
if two boards with different solder masks give different results on flux residue level after soldering with the exact same machine settings than it is clear that one of the solder masks is not compatible with your no-clean flux. could be the solder m
Electronics Forum | Tue Sep 23 16:50:05 EDT 2008 | snsmt
the guy that previous did the programs does not work here anymore, so i was the person that they elected to start learning. i wouldn't even know how to sabotage their programs! haha. My supervisor is helping me out, but he does not know much about pr
Electronics Forum | Tue Sep 23 16:54:22 EDT 2008 | slthomas
"He just knows how to give me deadlines on when i should learn this." That's one talent all managers seem to share. ;) Can you email me (via the smtnet link) your email address? I don't think I can attach a document from in this system and I don't
Electronics Forum | Fri Sep 26 08:11:15 EDT 2008 | dwelch123
Try swapping cards in Y1 enclosure. You can swap zero and one or two and three but make sure you change the shunt position and the dip switch settings and see if your problem switches cards. The lithium battery likes to fail on those cards. Reload th
Electronics Forum | Wed Oct 15 15:40:21 EDT 2008 | stepheniii
255 shuts it off, but if I remember correctly 254 still uses vision but passes almost everything? You might want to give 254 a try before resorting to 255. I believe 254 will still correct some pickup offsets. And iirc 255 isn't in the manual but so
Electronics Forum | Mon Oct 27 01:57:12 EDT 2008 | benefon
Hi It appears as if the clincher is not perfectly centered even if it does appear so. You can try to adjust the clincher offset values by entering trial values for the X and Y offsets. Try changing these values in both positive and negative directio
Electronics Forum | Sun Oct 26 12:06:09 EDT 2008 | pima
Hello I want to aks more experienced SMT engineers about one thing related with Fuji machines. Is it possible to protect some how to avoid populating pcb with component from different batch? We have one same part number same vendor but customer does
Electronics Forum | Fri Nov 14 07:56:49 EST 2008 | davef
Section 9 of J-STD-001 gives you what you need. Further: * Flattened [coined] lead: http://workmanship.nasa.gov/lib/insp/2%20books/links/sections/files/711.pdf * Flat lug lead: Look for the Package Designator �LT� on page 7 of http://www.allegromicr
Electronics Forum | Wed Nov 19 10:17:11 EST 2008 | jdengler
Hi aj, The X-ray vendors can probably give you more specific info for your loaction. They have told me it varies by location. At my site I would need a state issued license which would require annual testing for X-ray leakage. Jerry