Electronics Forum | Fri Sep 22 09:51:20 EDT 2006 | Rob
Hi Basem, Juki have been around a long time - at least 15 years (formally branded Zevatech in Europe) & have a very large instal base. Their machines are good quality, but a little pricey. I have seen a number of them working with no problems in T
Electronics Forum | Thu Sep 28 01:30:32 EDT 2006 | fastek
Todd- In light of the reply from an obviously confused Darren, an IP would be a fine "line balancer" in conjunction with your MY-12. Your choice of either an IP-1, IP-2 or IP-3 should be based on the type of components you want to run. You mentioned
Electronics Forum | Fri Oct 06 08:21:26 EDT 2006 | inds
Mario, what happens when there are components on the boards that are not rated to take temperature of 230-240 C Peak for a mixed assembly. I guess there are tons of sn/Pb components that have rated temp of 225-230 C.. So in guess you might want
Electronics Forum | Thu Oct 05 00:22:31 EDT 2006 | Dman97
Does any one know if it is possible to replace the stupid light pen on these machines with a standard mouse or trackball? I'm going crazy trying to get the damn thing to recognize any onscreen movements. Its like it has a mind of its own. Sometimes i
Electronics Forum | Thu Oct 19 09:39:41 EDT 2006 | wrongway
Hello all cm212 machine the max pcb size is 15.75 x 10 inches we have larger boards then that that was why we were looking at the cm402 model. as far as the feeders go we would be buying new feeders 8mm-56mm. I was also glad to here from someone th
Electronics Forum | Tue Oct 17 11:51:23 EDT 2006 | SteveT
where I can get an install disk for a Comtrol RS232/422 Interface controller? We're upgrading a PC and I need to move the controller but obviously this thing isn't going to be plug n' play, or even plug n' pray. I'm assuming there is one because I c
Electronics Forum | Mon Oct 23 10:46:58 EDT 2006 | Steve
I know Mydata has machines that have a 44" X 32" placement area, reflowing something that big is another story. Most reflow ovens I know of have a maximum conveyor width of 20", although Heller ovens can go 23.5" wide. If you're into Vapor Phase sold
Electronics Forum | Wed Oct 25 09:39:04 EDT 2006 | patrickbruneel
Electronics firms doing business in China need to be aware that while China RoHS targets the same substances restricted by the EU RoHS directive, the China policy stipulates that compliance can only be verified by testing done in accredited Chinese l
Electronics Forum | Wed Nov 01 00:01:05 EST 2006 | fastek
Get over it guys. China isn't going anywhere and it would be too late to do anything about it now even if someone could. It's our own fault for this anyways.......and I mean as consumers. In times when we demand free cell phones, PC's for $100 an
Electronics Forum | Sun Oct 29 22:47:03 EST 2006 | LMPH
We are going to start doing rework of Lead Free BGA's. Have always used flux for SN/Pb boards/BGA's with good results. Can flux be used fro lead free as well? Boards were originally assembled using lead free paste and components. Hence, the BGA w
