Electronics Forum | Fri Apr 22 15:02:39 EDT 2022 | proceng1
We used to empty the tank on Friday and let the stone basically dry out over the weekend. That was before I got involved with it. We were constantly replacing stones. Now, we empty the flux Monday morning and replenish with new. That way the stone
Electronics Forum | Sat May 14 00:10:30 EDT 2022 | cbeneat
Alex, I can tell you from experience it took a great deal of experimenting with settings when we first started running these. Our best course of action if the settings aren't making a difference, is the blow off. I've had it, let's say pretty high as
Electronics Forum | Fri May 27 14:22:47 EDT 2022 | proceng1
I am not exactly clear on what you are looking for. From my customers, assembly drawing notes are assembly specific. If there is hardware, they might include the stack-up. If we are conformal coating, they usually indicate keep-out areas. If an LED
Electronics Forum | Fri Aug 05 05:39:44 EDT 2022 | sarason
Use PCB Synergy for your Altium to PnP Generation. This gives you good data from the start. Check it on the machine program. Step by step as you work your way through the feeder list. Where do things go wrong, packages for IC's verses what you have b
Electronics Forum | Thu Sep 22 10:04:33 EDT 2022 | micropak
Good Morning, I have a Phoenix PCBA Analyzer 160KV with NanoFocus tube. The machine warms up till 104KV only (it gets some breakdowns around 100KV) and then it finishes warmup but doesn't go beyond 103KV while doing inspections. HTG Cable has been gr
Electronics Forum | Fri Oct 28 14:09:39 EDT 2022 | ttheis
Allowing a part to go over the board boundaries can cause collisions when boards are nested. The software on these machines has limitations but it is plenty capable and rooted in preventing physical damage to the machine. Once you are familiar with t
Electronics Forum | Wed Nov 16 17:18:42 EST 2022 | emeto
Volumes are not the only factor here. You might have low mix and low volume, but high complexity. Machine you pick based on the most challenging components you have to print/place/reflow. If boards are simple, than your level of expertise is importan
Electronics Forum | Thu Nov 17 21:52:27 EST 2022 | stephendo
You might be able to create a process that involves testing a sample before each run. But then you would need something showing that a given batch would be consistent enough to justify testing a pcb to prove the batch. Or if they accept SPC then you
Electronics Forum | Tue Nov 22 19:54:45 EST 2022 | davef
Every year, for the holidays, grannies come to the camera store to get their point & shoot cameras fixed. They've replaced the battery, but it still won't work. In the past, we used the eraser on the end of a No.2 pencil to buff the corrosion from th
Electronics Forum | Sat Dec 10 08:26:14 EST 2022 | poly
That procedure all works perfectly, and I'm read through that section of the manual however... 12. Perform Feeder Teach. Refer to the Feeder Teach Voyager help topic. I can't find anything in Voyager that explains the feeder teach procedure for t