Electronics Forum | Fri Jul 18 12:16:06 EDT 2014 | island2013
I had the same situation at a facility a few years ago. We moved our wash from one building to another and it was fine for months and then we had the foaming issue similar to yours. We tried everything from adding anti foam agents to even having th
Electronics Forum | Thu Jul 31 10:14:27 EDT 2014 | matusov
I know that some board houses have better > capability than others. Some can do down to 4mils > mask in between the leads I think. I know that it > also depends on the type of the mask they are > using - for some types you can't go down to the >
Electronics Forum | Thu Sep 24 00:52:41 EDT 2015 | ermani9
Hi.. Move the XY arm to the center of the machine. Turn on the servo then immediately hold “LOWER” then press “ORIGIN”. You should see the message now on the screen “DRIFT CHECK”. The arm will start to drift without an emergency condition occurr
Electronics Forum | Wed Aug 20 14:16:57 EDT 2014 | jax
I have a few questions: Why are you unable to panelize an aluminum board? We run aluminum boards all the time utilizing both V-Score and Routed designs. Panelization aside, what are the issues that you run into at printing? Are you trying to print
Electronics Forum | Mon Aug 25 10:27:51 EDT 2014 | swag
You might look at "Tacsil". It's a product we've used over the years for stuff like this. It's basically a sheet of material that can be cut into any shape with scissors or X-acto that's sticky on both sides. It can go thru reflow a bunch of times
Electronics Forum | Thu Aug 21 10:14:57 EDT 2014 | malard
I know my Sanyo machine is no longer made, and the Sanyo connector has died out, but I have an ASYS TRM-03 conveyor that I want to connect up to it, in the manual it references Sanyo for its output format by adjusting a couple of jumpers. However the
Electronics Forum | Fri Aug 22 02:10:55 EDT 2014 | mdang
I wonder if anyone can help me with this problem. My FUJI CP65 with 0201 camera is working fine for a while. Now, it starts losing the vision on 0201 camera. The system will run for a while then I don't see the part on the part monitor when the nozzl
Electronics Forum | Wed Aug 27 12:15:15 EDT 2014 | jimmyboz
I understand what you want, I do not however, understand why? I have checked some documentation and found nothing. If I know why, I might try harder for a solution. It doesn't seem like time is crucial, else you want to pre-pick. Two easy ways ar
Electronics Forum | Fri Aug 29 04:33:52 EDT 2014 | mun4o
Hi all, we have 2 smd line with 2 topaz x|| each.The machines are 10 year old.Now we need more capacity and I am looking for new line.Because there is not space for third line , we must change the p&p with more productive machines.I like Yamaha , an
Electronics Forum | Fri Aug 28 11:59:05 EDT 2015 | gascon5383
Actually I should have noted we resolved this issue. After chasing our tails for a while, we found that somehow there was a static charge on the boards going into the machine. This static was discharging to the camera through the board stop, causing